Results 41 to 44 of 44
-
01-26-2018, 10:20 AM #41
Man alive....
It DOES work!! I use Opera for my browser and they too have an extension to
achieve this!
Now... If i am seeing all of the pics i posted in all of my previous threads, is everybody
else also able to see them?? I have to say after a random look around i am seeing
pics all over the place from other peoples threads where i think i was seeing the
photo bucket ransom square.
For example... I am seeing your pics Scott and i am pretty sure YOU never paid the ransom!!!!
-
01-26-2018, 10:52 AM #42
-
01-26-2018, 02:03 PM #43
- Join Date
- Jun 2008
- Location
- Euclid,ohio
- Posts
- 197
Black- 1998 Z28
The only change I made to my original plans of 17 years ago was the convertor. I've been familiar with convertors since the musclecars of the 60s'. Convertors back then were 'questionable and loose',but if all you wanted to do was make a 'light to light streetfighter' automatics and convertors couldn't be beat. Now 36 years later(11 years ago),I would've thought that convertor technology improved,it didn't(for the common ones). In 2010 a TCI2800 went in,very loose,that stayed in for 4 years then put a Yank SS3600 in,tight and excellent in city driving. No plans on changing that one.
I've been working on rear ends since the 60s'. When I blew a bearing in 2004(OEM 3.23s') and being that I had every ratio available in the garage,2.41,2.73,3.08,3.23,3.42,3.73,4.10,& 4.56 and a couple housings and all the other parts needed,I built a 4.56 rear end. and ran that for 6 years. Incredibly wicked/vicious 1st & 2nd gear. I rebuilt the original OEM 3.23 rear end and currently running that. When spring arrives,the 4.56 rear end is going back in as it's in the garage crying 'put me back in'. Also building another rear,3.73 or 4.10(it'll probably be the 4.10 gearset) to go in after I run the 4.56 for a few years.
The engine has no mods as I travel a lot with it(12 trips from Ohio to Florida and many other places) and I want the reliability of the OEM engine.
The convertor(SS3600/3.23s') put me high 12s'. The 4.56s' puts me way ahead of high 11s'/12 sec cars in the 1/8 mile but then they go blowing by me after that. But the stock engine with convertor and gears gives me the 'light to light streetfighter' I want.Black 98Z A4 ,Yank SS3600 convertor,:SLP driveshaft loop,STB,PHB,LCAs,'flow-pac CAI,SFC,take-off 17x9 SS rims;StainlessWorks 'Y' & chambered exhaust,BMR LCA Relos,QA1s DblAdj-rear,Kenny Brown 6 Pt bolt-in cage,VGX pads
-
12-20-2022, 10:55 PM #44
- Join Date
- Nov 2022
- Location
- amesterdam
- Posts
- 14
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
I have another theoretical for you guys.
By CrazyCalvinWilliams in forum General HelpReplies: 42Last Post: 07-05-2016, 06:24 PM -
which lsx heads are compatible with my ls1
By wvbrett in forum Internal EngineReplies: 2Last Post: 06-28-2011, 12:24 PM -
Question: Is LT1 intake LS1 compatible?
By MarcusJ in forum External EngineReplies: 14Last Post: 10-15-2009, 10:20 AM -
are these parts compatible?
By NetrixTardis in forum External EngineReplies: 1Last Post: 08-11-2007, 07:54 PM -
Theoretical question about Israel
By Warbird in forum Political / Debate ForumReplies: 45Last Post: 09-12-2006, 10:49 PM
Bookmarks