Results 5,241 to 5,260 of 7110
-
08-24-2016, 03:14 PM #5241
I am not much of a welder and it's about 40-50 bucks to have it welded up right since I have the parts. Headers n Y n additional pipes are far more but will happen one of these days.
2001 Trans Am Vert
-
08-24-2016, 08:36 PM #5242
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
08-25-2016, 02:25 AM #5243
I could clamp since I have them but I have found welding to be a better way.
I found if you have the parts many exhaust places will install pretty cheap. I bought a muffler n tip for my offroad rig and they bent all new cat back pipe included up n over axle and welded it up for $110.
-
08-25-2016, 05:57 AM #5244
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Check out a company called Mandrel Bending Solutions.
They sell exhaust tubing in Stainless and Aluminum in all sizes. It's cheap too. I ordered all my tubing form them for under $120
-
08-25-2016, 06:32 AM #5245
I got all I need for now, but will look into them. I should have under $100 into having Hooker muffler and aluminized 90s and 18 inch 3.5 Stainless tips all welded in.
-
08-25-2016, 06:37 AM #5246
Probably doesn't have a welder or know how to weld.
Sent from my SM-G900V using TapatalkBoost gets you laid, unless your name is Jon.
-
08-25-2016, 06:38 AM #5247
Nvm, I was on previous page. Guess I was right lol.
Sent from my SM-G900V using Tapatalk
-
08-25-2016, 06:38 AM #5248
I wondered since he clamped all his.
-
08-25-2016, 07:09 AM #5249
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I mention them because no one in my area has or is able to mandrel bend tubing.
-
08-25-2016, 07:12 AM #5250
Cruising their site i saw they do have lots of nice pieces that could be handy in many applications. I already passed the site along to a buddy that builds racing hillclimb trucks since i know he can use some oddball exhaust configurations sometimes and they could prove helpful.
-
08-25-2016, 07:12 AM #5251
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Technically I clamped nothing on my current exhaust since its dumped headers atm lol. Later to be routed out the front bumper.
Sent from my HTC6535LVW using Tapatalk
-
08-27-2016, 01:31 PM #5252
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Removed my harness to get it repinned.
Sent from my HTC6535LVW using Tapatalk
-
08-28-2016, 01:27 PM #5253
I replenished my detailing shelf with some fresh new products. Almost all are Adams Polishes products. I have wanted to try their stuff for years and glad to now have $200 in cleaning supplies. Their Tire and Rubber cleaner is by far the best tire cleaner I have ever used. Their VRT ( Vinyl Rubber Trim ) is the best plastic and rubber dressing and protectant I have used to date. Water beads off of it and does not hang on, and it adds a dark new look without a high gloss. I hate wet high glossy tires, all that sticky silicone based stuff does is attract and hold dust. There glass sealant is incredible. I always clay and wax glass, this stuff makes wipers nearly unnecessary to have on. Water shoots right off. I am definitely a detail nut so this stuff has me quite happy.
2000 Trans Am WS.6 M6
SLP lid & bellow w/ K&N, GMMG catback w/ Corsa Clones, UMI SFC, UMI Adj. Panhard, UMI Adj. TQ arm w/ relocation kit, QTP Longtube headers ORY, LS6 intake, EGR/A.I.R delete.
Eibach prokit, Bilstein HDs, Nitto NT555s, skip shift elim, whiteface overlays, 20% tint, matte black decal/overlays
YouTube.com/DarrenWS6
-
08-28-2016, 04:09 PM #5254
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 40
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
Their vrt is great and I love their in and out spray. I picked up McKees 37 version of the in and out to try out. I tend to go elsewhere for stuff then Adam's. They got me into detailing but tend to be expensive for what it is. My gf opens my detailing closet and just gets confused by all the stuff I have. I had to go out and buy a 5 shelve unit to hold most of it.
Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.
-
08-28-2016, 05:34 PM #5255
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
I've been looking at what to replenish my stock with as well and I think I'll have to give their stuff a shot. I need something that can get water spots off. Here we have hard water so even when I dry the car while detailing it there are water spots.
Sent from my HTC6535LVW using Tapatalk
-
08-28-2016, 06:54 PM #5256
Tried fixing drivers mirror mount w jb weld but no luck. Searching for a replacement
-
08-30-2016, 08:20 AM #5257
-
09-01-2016, 12:44 PM #5258
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 55
- Posts
- 1,104
Silver- 1999 Trans-Am, 2012 Sonic
99 Trans Am, SLP Lid, Blackwing filter, smooth bellow, Ported TB, LS6 intake, Ws6 lower ram air box, OBX LT's, Magna Flow cat back, LS7 clutch, Tick MC, Hurst Shifter, Frost Tune, UMI SFC,LAC, STB, PB, Torq Arm, Super Hawk hood, Torq Thrust II, Kee Audio.
Strange S60 4:10's, D&S Rotors, S/S Brake Lines.
Nitto NT05R Track Tire's, 12.7 @ 108 / 1.82 60'
Wish list.
Coil overs, Heads & Cam
-
09-02-2016, 06:08 PM #5259
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I finally got the mounts finished for clearance.
-
09-02-2016, 07:30 PM #5260
Thread Information
Users Browsing this Thread
There are currently 6 users browsing this thread. (0 members and 6 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks