HELP!!! ABS and ASR Stopped Working!!!

[Mr. Luos]

Timkin is probably the best.
If I am not mistaken....they make the OEM bearings for several manufacturers.

[NastySS]

I apologize for not updating this issue. I replaced the Left front HUB, and that did not fix the problem. One day a few weeks later I was rotating the tires. For some unknown reason, I noticed a very sharp bend in the wire that went to the back of the left front hub. After looking at it more closely, I found that one of the 2 copper wires was broken and separated INSIDE the plastic wire sheathing right at the sharp bend in the wire. This break in the wire obviously kept the circuit from being completed. I cut the wire, stripped all 4 back back, put in nice splices, wrapped it all up in electrical tape, and everything immediately went back to normal. I had ABS and Traction Control once again at least a year after I lost them. Thanks to everyone who chimed in on this one.

[Redrokit8]

I don't believe the hubs are very expensive or all that difficult to install.

Do both. I have always been on the train of thought that if one goes....the other isn't far behind.

Yep, why suffer twice ? The only time I could think of doing just one would be if it was going to be sold right away. But I would still do both and use it as a selling feature to show prospective buyers that your maintenance was professional.

[JayTA98]

I replaced mine with Tinkem. I think is a good brand. I checked my wheel yesterday and I have play on the right side tire all aorund it. I check and the play is coming from the hub. The tie end rods and ball joints are tight. The funny thing is that the warranty was for a year and it just expired last month...