Results 21 to 25 of 25
Thread: Rear End FAQ!
-
05-30-2009, 01:36 PM #21
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
Lets add :
Rear end gear ratio RPO codes
2.73's (GU2) for autos
3.23's (GU5) for autos
3.42's (GU6) for M6.
Any others??
-
08-03-2012, 01:39 AM #22
- Join Date
- Apr 2011
- Location
- Norway
- Posts
- 16
- Corvette C5
What is a comfortable rpm for the ls1 on highway cruising?
-
08-03-2012, 02:56 AM #23
Keep it around 2,500 to no more than 3,000 -- that's our A4 car with 3.73's out back while tooling down the interstates at speed.
-
11-03-2019, 05:33 AM #24
- Join Date
- Nov 2019
- Location
- at the snow white beaches
- Posts
- 2
sliver- 2006 solstice
Im trying to find some info...Ive looked everywhere I can think of. what I want to know is...2008 cts dif internals and 2008 sts diff internals, are they interchangable? I know the cts is a different housing. but are the innards the same?? not woried about ratios. but the cts has the axle flanges on the unit and the sts has them on the half shafts/axles. so are the ring gear carriers interchangable??what about the gears if I want to change ratios too?( Ive set up lots of rears in the past,no issuses there) I dont want to buy the cts Ive found at a good price if the innards wont fit my sts( also in the pontaic solstice/saturn sky cars). I want to build a spare for my car so I can rebuild mine. I already got the sts but it's had some h20 in it....( ebay junk) and now I find another ebay rear with g80 at a good price if the innards will swap..thanks for any info!!!
-
11-04-2019, 01:10 PM #25
- Join Date
- Nov 2019
- Location
- at the snow white beaches
- Posts
- 2
sliver- 2006 solstice
I know this is a old thread but does any body have a clue if the innards are interchangable. there seems to be almost zero info on these gkn/getrag rearends.??thanks for any info.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rear LS1 98-02 Rear Disc Backing Plates/Calipers/Brackets
By peetsjunkie in forum Parts Wanted / TradeReplies: 2Last Post: 10-02-2007, 08:53 AM -
Rear alignment is off after Koni/!= rear isolator lowering, car pulls to right, specs
By anestech* in forum Suspension and HandlingReplies: 13Last Post: 07-08-2007, 09:42 AM -
Rear alignment issues after removing rear spring isolaters, adj trac bar fix it?
By anestech* in forum Suspension and HandlingReplies: 1Last Post: 06-19-2007, 07:06 PM -
Randy's Rear End Shop Get's Punked (Prank) - Woman looking for a bigger rear!
By powermelissa in forum Multimedia SectionReplies: 0Last Post: 05-25-2007, 10:37 AM -
how to remove the rear inside panels, where the rear spkrs are ?
By Eugenio_SS in forum ConvertibleReplies: 4Last Post: 05-19-2006, 04:39 PM
Bookmarks