*** Weekend TRAIN!!! ***

[1fastcamarosss11]

did you see my thread a while back with 4 or 5 terminators and a s/c mach?

no i missed it.

[1fastcamarosss11]

i have dropped so much money in the last few weeks on my car, now i have to get everything installed, then need the cage next.

[oneBADDz]

houston doesn't mess around.

[oneBADDz]

can you do any of the install work yourself?

[1fastcamarosss11]

i hear all of texas is like that.

[1fastcamarosss11]

can you do any of the install work yourself?

most/ all of it if i take time m,y dad helps a ton i'll do the work and he guides, but he gets dirty to. we did my rear end cover 2 weeks ago, very interesting tring to get that fucking panhand bar to line back up.

[oneBADDz]

hillbillies like FI

[1fastcamarosss11]

can you do any of the install work yourself?

i just don't have to much time to spend on certain things if i get my cam and heads next summer or late this year i'll have someone else put them in.

[1fastcamarosss11]

i have to get my car to pass emmisions right now. you ready for this.......

it didn't pass because my check engine light didn't come on at start up/ or at all. i thin i have a burned out bulb.

[oneBADDz]

It's all simple once you really get involved with it. Once you learn one big task, you'll be willing to tackle most anything on it because all the work is pretty well the same

[oneBADDz]

i have to get my car to pass emmisions right now. you ready for this.......

it didn't pass because my check engine light didn't come on at start up/ or at all. i thin i have a burned out bulb.

any reputable shop should have hooked it up to a scanner and would have know there was no problem. the light is just a dummy giveaway.

[1fastcamarosss11]

It's all simple once you really get involved with it. Once you learn one big task, you'll be willing to tackle most anything on it because all the work is pretty well the same

we have changed out at least 5 plus motors together in my montes. but fuel injections there's a little more to it and a ton more wires ect.

[oneBADDz]

have fun pulling out the guages once you do that you should be ready to take on the heads

[oneBADDz]

we have changed out at least 5 plus motors together in my montes. but fuel injections there's a little more to it and a ton more wires ect.

I'm gonna give you a hint. every connector on the engine has a different plug on it, you can't plug something into the wrong place. The harness pretty well lays out perfect, and with the addition of the different plugs on everything it's a breeze

[1fastcamarosss11]

any reputable shop should have hooked it up to a scanner and would have know there was no problem. the light is just a dummy giveaway.

i foung one good one or so i heard around here but it's about 450 for the dyno tune, i am changing my interior light to blue leds sunday so while i'm in there i am going to check it out. i want to try to get as much done as i can sunday in about 4-6 hours of work.

[1fastcamarosss11]

have fun pulling out the guages once you do that you should be ready to take on the heads

is it really that much fun?

[oneBADDz]

I'll be back in a bit if you're still around, I have to go unlock a sonata

[oneBADDz]

is it really that much fun?

it's just one of those things that is a PITA because of all the little stuff

[1fastcamarosss11]

have fun pulling out the guages once you do that you should be ready to take on the heads

i want to sell my head and cam as a combo to, after i get it all out, someone will want a cheap set of cnc ported slp heads and cam. i am at 12.59 best right now i know i get get better.

[1fastcamarosss11]

it's just one of those things that is a PITA because of all the little stuff

yeah like the clear front bumper light i started on them then it got dark, so i had to stop, pita to get them out after they are all unscrewed,