Results 3,361 to 3,380 of 7125
-
05-21-2014, 12:59 PM #3361Senior Member
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Yep which is why I have waited. I have everything minus push rods, main and rod bearings, and a few gaskets for the engine. I still need a fuel pump which I am going to get the Deatschwerkz D300 probably, well two of them eventually.
Originally Posted by RONS98TA
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
05-22-2014, 07:00 PM #3362Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,810
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
just a tease of this weekends upcoming events.....
-
05-23-2014, 03:37 PM #3363Member
- Join Date
- May 2009
- Location
- Tucson AZ
- Posts
- 173
Black- 2001 Pontiac Trans am WS6
Had it in the shop getting the pinon seal replaced and while there someone thought they would take my WS-6 badge off the back, they must of wanted it to because they scratched the back up all to hell. Lucky for me though the shop manager said they would pay for the repairs.
-
05-23-2014, 04:50 PM #3364Veteran
- Join Date
- Feb 2009
- Location
- Mansfield, PA
- Posts
- 22,144
Black & Blue- '02 WS.6 / '07 Suburban
Good to hear that the shop is taking care of it for you.
-
05-23-2014, 07:12 PM #3365Senior Member
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 57
- Posts
- 1,104
Silver- 1999 Trans-Am, 2012 Sonic
Well I making some good progress, need to make a new mount for the catch can and a few odds and ends and it should be ready to fire. But not untill I get the brain back from Frost and with the Holliday I figure Tuesday or Wednesday
99 Trans Am, SLP Lid, Blackwing filter, smooth bellow, Ported TB, LS6 intake, Ws6 lower ram air box, OBX LT's, Magna Flow cat back, LS7 clutch, Tick MC, Hurst Shifter, Frost Tune, UMI SFC,LAC, STB, PB, Torq Arm, Super Hawk hood, Torq Thrust II, Kee Audio.
Strange S60 4:10's, D&S Rotors, S/S Brake Lines.
Nitto NT05R Track Tire's, 12.7 @ 108 / 1.82 60'
Wish list.
Coil overs, Heads & Cam
-
05-24-2014, 10:15 AM #3366Member
- Join Date
- May 2009
- Location
- Tucson AZ
- Posts
- 173
Black- 2001 Pontiac Trans am WS6
Wow that intake really makes it look great in the engine bay, great color to! Originally Posted by kingls1
Well I making some good progress, need to make a new mount for the catch can and a few odds and ends and it should be ready to fire. But not untill I get the brain back from Frost and with the Holliday I figure Tuesday or Wednesday
-
05-24-2014, 10:18 AM #3367Member
- Join Date
- May 2009
- Location
- Tucson AZ
- Posts
- 173
Black- 2001 Pontiac Trans am WS6
Yeah it was pretty frustrating to say the least, but it was the kick i needed to get a black ws6 badge, so its bittersweet. Originally Posted by pajeff02
Good to hear that the shop is taking care of it for you.
-
05-26-2014, 03:55 PM #3368Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,810
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Can
you
say
Ford 8.8
read the updates in my 8.8 thread....
http://www.ls1.com/forums/f7/my-6-liter-build-174257/
http://www.ls1.com/forums/f8/my-8-8-rear-build-165553/
6.0L Block - Forged 403ci, Polluter Stg3 Cam, FAST 102mm Intake, NW102 TB, MSD wires, NGK TR6 plugs, Truck Coil Packs, LS3 Fuel Injectors, CC Pacesetter LT Headers, TS&P ORY, QTP e-Cutout, Magnaflow Muffler, 104mm Air Lid & Line Lock, Catch Can, Stage 2 T56 w/Viper shaft, PRO 5.0 Shifter, Tick MC, SPEC Stg3+ Clutch, QT SFI BH, MWC DSL, Full UMI Performance Suspension, Viking Coilovers, YR1 Snowflake Wheels wrapped in NT555 tires & Custom Fab Ford 8.8 rear w/Wavetrac Diff 3.93 Yukon Gears, WSQ Hood, 3"CM Strange Eng Drive Shaft.
00 FB Vert - "Stockish" Belstein Shocks, Hotchkis Springs (1" Drop), C7 Snowflake 17" Wheels
78 FB - Just getting started......
Horsepower never lies, but is often lied about!
-
05-27-2014, 04:20 AM #3369Member
- Join Date
- Jul 2010
- Location
- MI
- Posts
- 156
White- 2000 Pontiac Trans Am
Ordered a set of CCW 505A wheels 19x10 for the front and 19x11 in the rear painted hyperblack with Continental extreme contact DW 275 front and 305 rear. Can't wait to get them
-
05-27-2014, 06:03 PM #3370Senior Member
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 57
- Posts
- 1,104
Silver- 1999 Trans-Am, 2012 Sonic
She's Alive....finished mounting and pluming catch can, installed fresh from Frost PCM, fixed a minor fuel leak at the pressure gauge, everything looks and sounds right. Now if the rain goes away I might get to drive it...
-
05-27-2014, 07:09 PM #3371Senior Member
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 42
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
Got the new dash put in. Freaking things are up to $375 a piece now from GM. Gone up almost $200 in 3 years.
-
05-28-2014, 05:14 AM #3372Senior Member
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
do you mean the dash pad under the windshield or the actual dash where the air vents and everything sits? Originally Posted by raynor139
2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by Vengeance SCCA and Car Show Approved 
2019 Ram 1500 Crew Cab Laramie Limited
2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
06 Quad Cab HHHHemi - Sold
99 Hugger Orange Camaro - Sold
97 Camaro - Sold
-
05-28-2014, 08:18 AM #3373Senior Member
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 42
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
Dash pad Originally Posted by theorangeguy
Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.
-
05-28-2014, 10:25 AM #3374Senior Member
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
wow...that is really expensive. Originally Posted by raynor139
-
05-28-2014, 11:01 AM #3375Senior Member
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 42
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
Yeah only thing I could find cheaper were used ones and they are fragile brand new. I didnt want to buy a used one and it crack on me in under a year. Cheapest I found after 3 days of searching was 375 and $30 in shipping. Originally Posted by theorangeguy
-
05-30-2014, 07:02 PM #3376Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,810
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
DSL, New ORY & drive shaft installed on the 8.8.
-
05-31-2014, 04:57 AM #3377Senior Member
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 57
- Posts
- 1,104
Silver- 1999 Trans-Am, 2012 Sonic
Was able to get the car out for a short drive after the intake swap last evening and she ran great. Seemed crisp and pulled nice through midrange.
-
06-02-2014, 03:13 AM #3378Member
- Join Date
- Jan 2009
- Location
- MARYLAND
- Age
- 53
- Posts
- 807
BLACK- 1998 PONTIAC TA
Driving down to see Frost tomorrow morning to finally get my dyno tune. I cant wait to see what kinda numbers it's gonna put down.
-
06-02-2014, 06:19 AM #3379Senior Member
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
ordered new pads and rotors...gonna paint my calipers when I pull the wheels off.
-
06-02-2014, 07:03 PM #3380Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,810
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
bleed the brakes, fill the rear, looked over once more before dropping her. Start her up and let her idle and just as I get ready to pull out the garage....
it starts raining like a
FU nature!!!!
at least she moved under her own power. Getting her back up the driveway was a major bitch. Still needs more tuning and getting the revs right to be able to move it let alone up an 25* incline while it's raining. Challenge accepted.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 11 users browsing this thread. (0 members and 11 guests)
Similar Threads
-
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks