Results 2,981 to 3,000 of 7122
-
02-26-2014, 01:54 PM #2981
-
02-26-2014, 02:58 PM #2982
the t/a's molding is too low anyway, almost any ding would be above the molding.
-
02-26-2014, 05:08 PM #29832002 WS6 A4 Slp lid,
longtube headers w/ high flow cats,
loudmouth exhaust, SLP y-pipe,
799 Heads, TSP Tv2, Dual valve springs, titanium retainers,
Chromoly pushrods, 12 Bolt rear 3.73 gears
torque thrust II black 17-9.5" front 17-10" rear
-
02-27-2014, 04:26 AM #2984
- Join Date
- Apr 2011
- Location
- Johnstown,PA
- Age
- 55
- Posts
- 1,104
Silver- 1999 Trans-Am, 2012 Sonic
Ordered coolant pipe,knock sensors, wires and oil pressure sensor. Parts I'm replacing for LS6 intake swap. More to come. Also sold a set of LS heads I had so some extra loot for something else...
99 Trans Am, SLP Lid, Blackwing filter, smooth bellow, Ported TB, LS6 intake, Ws6 lower ram air box, OBX LT's, Magna Flow cat back, LS7 clutch, Tick MC, Hurst Shifter, Frost Tune, UMI SFC,LAC, STB, PB, Torq Arm, Super Hawk hood, Torq Thrust II, Kee Audio.
Strange S60 4:10's, D&S Rotors, S/S Brake Lines.
Nitto NT05R Track Tire's, 12.7 @ 108 / 1.82 60'
Wish list.
Coil overs, Heads & Cam
-
02-27-2014, 06:34 AM #2985
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
got my new tires installed last night...drove her to work for the first time in a while. Might DD my TA for a little while...
-
02-27-2014, 07:48 PM #2986
No, I never go to wal fart, ever. But when I took it to Publix to go grocery shopping, yes, the cover was on. That is one major reason why, at 12 years old, my trans ams still look like new. And per thread title, I put Strano springs on the rear of my hawk. Now I have to order Eibach Sportline springs for the front. The Stranos were too low. 3/8" clearance just doesn't get it.
Last edited by 02 red hawk; 02-27-2014 at 08:00 PM.
-
02-28-2014, 06:28 AM #2987
-
02-28-2014, 09:26 AM #2988
- Join Date
- May 2010
- Location
- Wilkes-Barre, PA
- Posts
- 1,547
Black/Black- 98 WS6/04 Sierra Dmax
Callies 383, Trick Flow 225, Rapid Motorsports Dominatior 2 X cam, ls6 ported oil pump,42lb injectors, FAST 92/92 , ASP underdrive pully, eletric water pump, Pacesetter LT's, Pacesetter ORY, Magnaflow catback, e-cutout, Yank SS 3600, Performabuilt stage 2 4l60e, Strange S60 ,4.10s, Detroit Truetrac, (UMI) - Adj. LCA, Adj. tunnel mount torque arm, Adj. panhard bar, Drag bar, subframe conectors, shock tower brace. 465rwhp-438rwtq 11.09@119.90.
-
02-28-2014, 09:45 AM #2989
-
02-28-2014, 11:35 AM #2990
If your car sits that low with Strano's installed, I would start checking other suspension components to see what's happening...unless you are running an unusually large tire.
-
03-01-2014, 07:29 AM #2991
My hawk has the 1LE suspension, still bone stock. If you are familiar with 2002 trans am firehawks, then you may have noticed that the 1LE cars sit higher than the Bilstein cars. Can anybody here shed some light on why a Bilstein suspension ($1099) looks better (lower) than a 1LE suspension ($1899) hawk? SLP couldn't answer that question. Anyway, I like the stance of the Bilstein hawks better than mine. After seeing a thread about sagging springs on firehawks, I bought Strano springs. The rear is now perfect to my eyes. Strano springs took the nose down to 3/8"clearance, too low for my taste. Stock springs are back on the front which makes it higher than the rear. What brand of Eibach springs are on the Bilstein suspension hawks? They sit higher than Strano springs. I'm thinking these are the springs, can anybody confirm this?http://www.stranoparts.com/data/images/p35130153529.jpg Springs, Optional Eibach Package, 1993-02 Camaro/Firebird (set of 4) Strano part #70009. And the car has Koni 4/4s.
Last edited by 02 red hawk; 03-01-2014 at 05:13 PM.
-
03-01-2014, 05:09 PM #2992
-
03-01-2014, 06:50 PM #2993
Pulled off the cover, made room to drive her out of the hanger (after charging Batt.) fired her up and went for a 100 mile spin... Whilst I had her out I installed the headlamp gear up-grade thingy... Took about three hours. most of the time was spent hunting those little nuts I kept dropping...$%^##
-
03-01-2014, 06:54 PM #2994
- Join Date
- Aug 2007
- Location
- Greensboro, NC
- Age
- 40
- Posts
- 1,335
Pewter- 2002 Trans Am WS6 M6
Got myself a porter cable and the pinnacle xmt polishing kit. A bunch of Adams car care products that they had on clearance and sale and some touch up paint. Should be able to keep me entertained for a couple days when it gets nice out.
Mods - Lid, Skip Shift Eliminator, MGW shifter, UMI SFCs, Founders Lower Control Arms, Founders Panhard Bar, Founders Adj. Torque Arm, UMI Torque arm mount, MWC Drive shaft safety loop, KONI Yellows, Strano Springs, Strano Sway bars, UMI Upper and lower A Arms, 160 thermostat, TSP headers and TSP true duals Monster stage 2 clutch, racetronix fuel pump, Strange S60 rear axle and tune by Frost.
-
03-02-2014, 08:05 AM #2995
I finally got around to soldering in the pass side window fix. Also found the wire I had installed for the dimmer bypass for my DVD player. Today is to order the LED tailight bulbs.
-
03-02-2014, 10:29 PM #2996
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
I bought Kooks TDs to go with my Kooks 2" headers. I can't wait to get my motor all built up and see what it sounds like through my cammed 396.
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
03-04-2014, 04:01 PM #2997
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
My Kooks with 2" primaries came in today.
-
03-04-2014, 04:46 PM #2998
Works of modern art right there. Very nice!
-
03-04-2014, 05:15 PM #2999
-
03-04-2014, 05:41 PM #3000
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks