do anyone have 315s out back on a f-body?

[Tyler_LS1]

looks good man! chrome ZR1s? what kind of exhaust do you have?

[fastt]

looks good man! chrome ZR1s? what kind of exhaust do you have?

I have the SLP Loud mouth.

[fastt]

Since i started this Thread its only right that i show you guys my 315s
I would like to thank all you guys for showing off your F-bodys with 315s on the back of them.

[10spokess]

I have the SLP Loud mouth.

I like how you have the 1997 SS spoiler on there it makes the rear end look so clean

[fastt]

I like how you have the 1997 SS spoiler on there it makes the rear end look so clean

Thanks bro

[Durango]

That looks kick ass I bought from oe Wheels as well 10.5" rims with 295/35/18 and a slight rub on the drivers side on a launch but I have an ss3200 TC with SFC Panhard bar and relocation brackest and lca I had to cut my brackets and cut the suspension stopper as well

[Durango]

Ok, damn. Wish i could get some 315s on the car. Ill go with 295/35 on the 10" rims until i can get at least 10.5" rims.

It will rub a little with 10.5 " with 295/35/18 cut the suspension stop and beat in inner fenders a bit and your good to go :-) I don't know how these guys put on 335's ouf looks amazing but you would need a diffrent offset mine is 56mm I would say a 46mm would be sweet and no rubbing or even 50mm with a 295/35/18

[transamtom]

It will rub a little with 10.5 " with 295/35/18 cut the suspension stop and beat in inner fenders a bit and your good to go :-) I don't know how these guys put on 335's ouf looks amazing but you would need a diffrent offset mine is 56mm I would say a 46mm would be sweet and no rubbing or even 50mm with a 295/35/18

I just put a set of actual Corvette Speedlines on my V6 DD 285/35/18 and had to grind and cut the bump stop mounts off to get them to fit.

I guess the Vette rim offset is different?

My C6 9.5's from OE wheels fit no problem but they are on the TA now.

[Spikito]

how much does a set of those cost?

[cancam99ss]

With 315 I was fine no fender rub unless under hard corner acceleration,. Did a fender roll now I'm good

[10spokess]

When you guys did the fender roll did it make the paint chip or buckle?

[tatertot91]

When you guys did the fender roll did it make the paint chip or buckle?

On my trans am it did a little on just the drivers side. I took it to a shop around here and they said they used a lot of heat. Some crack some dont, really depends on your paint and whether or not the person doing the job rushes it. Good thing to do is if you have any cracks get some touch up paint from your auto store and fill in the cracks to seal it back up.

[fastt]

how much does a set of those cost?

Im sorry i took so long to get back to you,but i paid $462 for them.

[2001camaroSS]

got my 315s on they look great. ill post some pics soon.

[tatertot91]

got my 315s on they look great. ill post some pics soon.

[2001camaroSS]

no mods either. I am amazed

[fastt]

Shoulds good guys,I cant wait to see the pictures of your cars with the 315s on the back of them.

[youngrigo]

315/30-18







315-35-17

[fastt]

315/30-18







315-35-17

Looks good bro.

[35th-ANV-SS]

Young - your car back up and running again now?