****4th of July TRAIN****

[Knight]

Mornin.

[GTP231]

Mornin

[Spaz]

FRIDAY!!!

[jrbonds]

Good friday morning guys!

[konigandy6]

It's Friday, Friday... gotta get down on Friday




Hey guys.... which seat shall I take?

[ls1camino]

Hey guys.... which seat shall I take?

The one with current flowing through it...don't forget to wet the sponge.

[jrbonds]

I think I'm going to attempt to take the passenger side head of my car this weekend to fix the broken header bolt. Exhaust leak is driving me insane.

[ls1camino]

I think I'm going to attempt to take the passenger side head of my car this weekend to fix the broken header bolt. Exhaust leak is driving me insane.

Have fun with that...the bottom rear bolt is a giant pain-in-the-ass...ask me how I know

[jrbonds]

Have fun with that...the bottom rear bolt is a giant pain-in-the-ass...ask me how I know

Great. Now I'm really looking forward to this.

I looked on ls1 how to and I'm not understanding something, if I'm only removing the one head, do I remove all the pullies and the belt to? But I think I'll be ok. If not the bf its on stand by.

[GTP231]

Have to work tomorrow

[Knight]

I'm hungry.

[ls1camino]

Great. Now I'm really looking forward to this.

I looked on ls1 how to and I'm not understanding something, if I'm only removing the one head, do I remove all the pullies and the belt to? But I think I'll be ok. If not the bf its on stand by.

If you're only removing the passenger head, you can leave all of your front accessories on. I would remove the tensioner, but that's only because it clears up wrench turning space.

Removal:
1. Remove Intake Manifold
2. Remove Coils
3. Remove Valve Covers
4. Remove Rocker Arms
5. Remove Pushrods
6. Unbolt Headers
7. Unbolt Heads

Installation:
Reverse above.

Note 1. Replace the head gasket, don't reuse the one that's on there.
Note 2. Don't forget to clean out the coolant that WILL leak into the head bolt threading in the block.
Note 3. Air ratchet (with deep 10mm and deep 15mm sockets) is your friend.
Note 4. Don't be afraid to bend the headers out of your way...the y-pipe will have some give in it to allow for the sockets to go above and below the flanges.

Good Luck.

[jrbonds]

If you're only removing the passenger head, you can leave all of your front accessories on. I would remove the tensioner, but that's only because it clears up wrench turning space.

Removal:
1. Remove Intake Manifold
2. Remove Coils
3. Remove Valve Covers
4. Remove Rocker Arms
5. Remove Pushrods
6. Unbolt Headers
7. Unbolt Heads

Installation:
Reverse above.

Note 1. Replace the head gasket, don't reuse the one that's on there.
Note 2. Don't forget to clean out the coolant that WILL leak into the head bolt threading in the block.
Note 3. Air ratchet (with deep 10mm and deep 15mm sockets) is your friend.
Note 4. Don't be afraid to bend the headers out of your way...the y-pipe will have some give in it to allow for the sockets to go above and below the flanges.

Good Luck.

Thank you so much. That helps greatly. I'm sure I can do this. Just going to be 110 outside tomorrow, and with oklahoma humidity 125. Got to get it done though, my gas mileage is going to crap.

[ls1camino]

Thank you so much. That helps greatly. I'm sure I can do this. Just going to be 110 outside tomorrow, and with oklahoma humidity 125. Got to get it done though, my gas mileage is going to crap.

Anytime

[Spaz]

ready for 5:00... eastern standard time... post meridiem...

[konigandy6]

ready for 5:00... eastern standard time... post meridiem...

I'm in the same boat... but wating for 6:00

[67CamaroRSSS]

ready for 5:00... eastern standard time... post meridiem...

Meridian. Those are the longitudinal lines (they go north to south) on a map or globe.

[Knight]

Post Meridiem - that's Spaz speak for - after sucky day.

[Spaz]

Meridian. Those are the longitudinal lines (they go north to south) on a map or globe.

post me·rid·i·em
























(m-rd-m) adv. & adj. Abbr. P.M. or p.m. or p.m. After noon. Used chiefly in the abbreviated form to specify the hour: 10:30 p.m.; a p.m. appointment. See Usage Note at P.M.



i put in meridium... not meridian...

[cammed goat]

I don't care what anyone says at my job. Mazdas are NOT popular cars. If they were, I wouldn't be home right now.