Results 1 to 20 of 26
Thread: Newbie member w/new ride 98Z28
-
09-03-2007, 05:28 PM #1
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
Newbie member w/new ride 98Z28
I have always had super fast Oldskool cars, decided I wanted to get something little newer...Hope you like...
-
09-03-2007, 05:34 PM #2
-
09-03-2007, 05:43 PM #3
- Join Date
- Nov 2005
- Location
- San Diego, California
- Age
- 54
- Posts
- 228
Pewter- 2000 Camaro SS
Very Clean.....
-
09-03-2007, 06:02 PM #4
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
Few more pics...
12 Moser with moser axles, 4.10 gears QA1 coil overs front and rear, all the tubular upper lower arms on front,All the supporting sway bars etc. Ross pistons,Oliveor rods, TEA CNC ported stage 3 heads, LS6 intake, 350 turbo w/rev pattern and tranny brake, and all the high end internals. N20 drive shaft, NX gemini kit, wolf craft cage, custom built coated headers, 3" exhust with X pipe into bullet mufflers, Mickey sportsman fronts on 3.5 welds, Mickey 28.5 x 12.5 et streets on rear. Etc. Just a pump gas toy to play with.Last edited by OldskoolRcr01; 09-03-2007 at 06:06 PM. Reason: 1 pic did not display
-
09-03-2007, 06:06 PM #5
wooow great car, and color comination, i saw on your sig that you have a N20 drive shaft,, who makes that?
-
09-03-2007, 06:06 PM #6
also love the painted griill to match the strips
-
09-03-2007, 06:10 PM #7
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
Dennys
dennysdriveshaft.comLast edited by OldskoolRcr01; 09-03-2007 at 06:16 PM. Reason: wrong web address
-
09-03-2007, 06:13 PM #8
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
Pic of the front suspension
-
09-03-2007, 06:15 PM #9
ANy idea what kinda times? 11.0 ish or 10.5xish?
-
09-03-2007, 06:19 PM #10
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
Have not raced it yet, plan to do it the 16th of Sept...wishfully thinking high 10s on motor, low 10s high 9s on spray.
-
09-03-2007, 06:21 PM #11
GL on the 10's on motor. If you get a 9 make sure you post it!!
-
09-03-2007, 06:25 PM #12
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
I will post some times and some vids, from the track...either way I enjoy driving it around on pump, I have always had BIG HP C16 race fuel street cars, so nice to just pull up to the 93 octaine and cruize...Thanx for the complements.
-
09-03-2007, 06:31 PM #13
We dont have 93 down here anymore sure wish we did. And heck yes it is great to be able to just pull up to a pump and go. Cam only 11.7's here. Have some heads I need to put on. Would go nuts if I ran 10's all motor. Have bottle myself if I cant do it on the motor. 10 second street cars lolololol....
-
09-04-2007, 09:47 AM #14
nice car oldskool, are you on the eifba board as well?
-
09-04-2007, 11:05 AM #15
- Join Date
- Dec 2006
- Location
- Jenks/Tulsa
- Posts
- 4,798
Light Pewter Metallic- y2k 8-cylinder catfish
Very very nice!
2000 Chevrolet Camaro Z28 A4 - Light Pewter Metallic
Direct Flo lid, SLP Loudmouth, Bassani Offroad Y-Pipe, BMR strut tower brace, BMR subframe connectors, shift points tune and !EGR
2011 Kia Forte EX A6 Sportmatic - Titanium Silver Metallic
-
09-04-2007, 02:36 PM #16
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
-
09-04-2007, 02:41 PM #17
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
Love the color combo as well as the hood, Awesome drivetrain, Can't wait to get my 9". Good luck hope she hooks up well for ya!!
2000 SS Camaro Heads, Large cam, Fast 90, 9"w/430's and locker, yada yada yada... you get the picture
1971 SS ElCamino 402 Big Block 550HP
2006 Silverado 2500HD 496 cubic inches of pure muscle
-
09-04-2007, 03:31 PM #18
-
09-04-2007, 05:34 PM #19
- Join Date
- Aug 2007
- Location
- Iowa
- Posts
- 22
-
09-04-2007, 05:56 PM #20
- Join Date
- Sep 2007
- Location
- Michigan
- Posts
- 15
Black- 1999 Twin Turbo Trans Am
Great looking car! Looks like a lot of fun and a very solid set up. Also the color combo looks great, never seen it before, very unique!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New Member and new Ride!
By SSRS in forum Member's RidesReplies: 28Last Post: 06-12-2010, 02:44 AM -
newbie member
By 10xowner in forum New Member IntroductionsReplies: 4Last Post: 04-11-2010, 03:48 PM -
New member/New ride
By Bassplayer92 in forum Member's RidesReplies: 3Last Post: 01-06-2009, 07:32 AM -
New Member - Finally Got My New Ride!
By SpenceSpeed in forum Member's RidesReplies: 4Last Post: 05-05-2006, 07:52 PM -
New Ride New Member
By 01Ls1Tx in forum Camaro / SSReplies: 10Last Post: 03-29-2006, 01:55 PM
Bookmarks