What bulb do I need for my door?

[opprime]

I feel like I am asking to many questions. I need a new bulb to light up my driver side door lock and window buttons. I just don't know what bulb number I need for my 99 ta. The buttons don't light up themselfs but there is a little light neer the door handle. anyone know the bulb number? thanks

[TheKitchenSink]

not sure..you could just take it out and go to an autoparts store and get a new one I would assume

[02WS6dream]

I replaced mine not long ago...don't remember the #, but they looked it up for me at the parts store. Or you could always call the parts dept at the dealer and get a #.

[02z28ls1]

all the bulb numbers are in the owner's manual I believe.

[rbob93]

all the bulb numbers are in the owner's manual I believe.

Most but not all

And I believe Kage is right about the #168

[02z28ls1]

If you still haven't found it I'll look it up later-let me know.

[99'CajunFirehawk157]

Old bulb has "74" stamped on it....

[chad3113]

Old bulb has "74" stamped on it....

This is correct. I JUST came back from Advance and picked up a pack myself.

[99'CajunFirehawk157]

I also ordered a pair of #74 "hid" white leds off ebay and will try those too and advise...

[JEB]

Bulb number 74 is one the correct bulb numbers. However, bulb number 561 should also work as well as bulb number 194.

[99'CajunFirehawk157]

I just ran this down yesterday: NEGATIVE Ghostrider JEB, you will need a large hammer to fit a 194 bulb in a 74 socket, it is twice the size of a 194!

[mikmar]

Advance Auto Parts sold me a #37 for mine- it works just fine.

[99'CajunFirehawk157]

Put some white #74 leds in mine today, since these have a better forward beam like a flashlight rather than the wide spread patten of the filiment 74 bulbs, I think the color is much brighter on the switches, worth the under $10 for both and the 10 mins to do it, IMHO.

[mikmar]

Sounds good-may give it a try too!