Results 1 to 10 of 10
Thread: Ported MAF
-
08-02-2005, 11:30 AM #1
Ported MAF
I just ported my stock MAF ends about 1000 miles ago. All and all it was a time consuming task. Cuting with the hack saw in 100 degree heat is fun and for some awful reason the metal is like impervious to any bit on my dremal tool set. On top of that I did not notice any SOTP feeling which I figured I might not. Out of all the mods that I have done this I would recommend last.
┌∩┐(◕_◕)┌∩┐
Man: The Mods you are fighting,
they are the biggest Men I have ever seen. I
wouldn't want to fight them!
Me: That is why no one will remember your name!
-
08-03-2005, 09:02 AM #2
- Join Date
- Aug 2005
- Location
- MO
- Posts
- 8
Electron Blue- 2003 Z06
With all due respect, porting MAF is waste of time and effort. The end result is very little if anything at all, also will be taking a chance of throwing codes or causing other issues.
I would recommend to channel that time and effort to port and polish TB for greater hp gain.
-
08-03-2005, 08:11 PM #3
I ported my first maf, then tried to get my car tuned. It made it impossible to correctly tune. I have an unmodified stock maf, and fast than ever.
Leave it alone.
-
08-04-2005, 01:25 PM #4
Its much easier to just buy a Granatelli MAF. I gained 2/10th of a second in a quarter mile just from a simple bolt on part.
-
08-05-2005, 10:04 AM #5transam1998Guest
I had my car tuned by EPP, they tried with the Granetelli MAF at first, it made 8 rwhp and 7 ftlb tq more than the stock MAF, but the air fuel ratio was all over the place, in the end, we had to leave the stock one on so I didn't take a chance of leaning out my motor with the new mods.
-
08-07-2005, 09:48 AM #6Originally Posted by 03EBZ06
Thanks for the heads-up blackSS01
-
08-07-2005, 10:42 AM #7
-
08-07-2005, 09:16 PM #8
- Join Date
- Aug 2005
- Location
- Crystal Lake IL
- Age
- 47
- Posts
- 2,517
Pewter- 2001 Camaro Z28 M6
I ported mine too. My camaro ran fine, but once I installed the SLP 85mm I noticed quicker response then my ported MAF.
Screwing with the maf has hurts other and help others, so its definitely a crap shoot
-
08-08-2005, 05:33 AM #9transam1998GuestOriginally Posted by ibanez7
-
08-10-2005, 11:45 AM #10ProphecyGuest
i ported my MAF and had my car tuned by slowhawk... Everyone i know has said they have never seen a better A/F ratio.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ported tb ,maf??
By 14camarolover in forum External EngineReplies: 11Last Post: 05-27-2011, 12:16 PM -
buy 243's or get my 853's ported?
By Ryans99LS1 in forum Internal EngineReplies: 7Last Post: 11-09-2009, 06:04 AM -
New .600 Springs, Ti Retainers, LCA Relo. Brackets.Ported MAF, Ported 99 TB & More
By rcleveland@barrick.c in forum Parts For Sale / TradeReplies: 5Last Post: 11-02-2007, 09:22 PM -
SLP LS6 intake, Whisper Lid, Ported Throttle body, Ported MAF
By cru ss n in forum Parts For Sale / TradeReplies: 15Last Post: 05-24-2006, 08:22 AM -
Ported LS1 MAF
By 2000TX SS in forum Parts For Sale / TradeReplies: 13Last Post: 12-03-2005, 11:59 AM
Bookmarks