Results 1 to 10 of 10
Thread: Underdrive Pulleys for a C5
-
04-03-2007, 04:52 PM #1
- Join Date
- Mar 2007
- Location
- hayward/castro valley, CA
- Posts
- 95
Silver/Pewter- 2000 C5 Corvette 6psd
Underdrive Pulleys for a C5
Im looking to get some underdrive pulleys installed on my C5. Has anyone installed underdrive pulleys? Are they easy to install? Are they worth it? Any suggestions on where I can buy some, and about how much$ they are? Thanks
-
04-03-2007, 09:35 PM #2
i talked to a guy this weekend who did one on his c5 and his said "it was a pain in the ass and took forever""
had to drop the steering rack
he paid like 250 from some texas speed place i dont remember though
-
04-05-2007, 02:56 AM #3
- Join Date
- Jan 2007
- Location
- Lake Geneva, Wisconsin
- Posts
- 37
millenium yellow- 2000 corvette
SLP makes a nice set of undrdrive pullies.I haven't heard anyone really say if they notice a difference from them.
-
04-07-2007, 07:10 AM #4
do you have HEADERS YET?
if not.... then focus on the real HP gaining mods first315rwhp 98 SILVER Z28 (3500lbs)- SOLD
400rwhp 99 HUGGER SS (3375lbs)- SOLD
340rwhp 02 YELLOW Z06 (3040lbs)
-
04-10-2007, 01:06 AM #5
- Join Date
- Mar 2007
- Location
- hayward/castro valley, CA
- Posts
- 95
Silver/Pewter- 2000 C5 Corvette 6psd
well im gonna get some shorty headers eventually, I want longtubes but as i understand it, those are illegal in CA my home state. I hear shorties only give u about 10 horses, and pulleys around 12-15, but shorties are about 1000 plus installation, unless i do the installation myself.
my next two mods at this point are prolly gonna be high flow TB and an X pipe
-
04-10-2007, 11:20 AM #6
- Join Date
- Apr 2007
- Location
- Colorado
- Posts
- 4
Platinum- 1999 C5 Corvette
try this link:
www.aspracing.com
They have a harmonic balancer, part # 941020 for $248. I'm looking to install a pulley kit also. I think SLP makes a kit too.
www.slponline.com About $236
-
04-10-2007, 12:38 PM #7
- Join Date
- Apr 2007
- Location
- Colorado
- Posts
- 4
Platinum- 1999 C5 Corvette
www.aspracing.com or www.slponline.com
both have the harmonic balancer pulley, slp has the bolt with the pulley. Just ordered mine and will install it next week.
-
04-25-2007, 10:02 AM #8
- Join Date
- Jan 2006
- Location
- south florida
- Age
- 65
- Posts
- 5
tourh red- 1998 corvette
I did mine about 2 weeks ago your going to have to lift the car lower your suspention
remove the rack and loosen the engine cradle and wedge it in the front so you have enough
room to remove the pully its a pain best thing is to have it done out
-
04-28-2007, 08:36 PM #9
If you do a cam, then do pulleys at the same time. Just doing pulleys alone...not worth it.
-
04-29-2007, 06:40 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Underdrive pulleys?
By Supersport0126 in forum External EngineReplies: 13Last Post: 04-10-2014, 04:02 PM -
Question: underdrive pulleys?
By bpopham22 in forum External EngineReplies: 19Last Post: 04-17-2010, 01:30 PM -
underdrive pulleys
By Pony_Eater in forum External EngineReplies: 22Last Post: 09-07-2008, 04:52 PM -
Underdrive Pulleys
By tommyjt2006 in forum External EngineReplies: 13Last Post: 12-01-2007, 11:15 AM -
Underdrive Pulleys
By FormulaFiend in forum External EngineReplies: 4Last Post: 03-22-2007, 08:38 PM
Bookmarks