**** Da TRAIN!!! ****

[jad628]

I just bought a set of Triton rotors F&R for my '99 Z28. They're slotted and drilled but I ADMIT I bought 'em for looks! Okay?

Gonna clean up and two tone the calipers black/silver and have CAMARO decals on the front and Z28 on the back. Thinking about ceramic pads. I've had 'em on the wife's vehicle and they hold up well, brake good, and seem pretty easy on the rotors.

My stock rotors are okay, but I have one that is very slightly warped (a turn would take care of it) because I get a slight squeak in every revolution of the wheels. It's driving me nuts.

Any recommendations for brake pads from a place like Auto Zone, Advance, NAPA, or such?

[Spaz]

The first injury was in my lame attempt to push motor in crate a foot so I could flip it right side up. I succeeded only in hurting my hands and back. Got a damn splinter.

Second injury was in removing the knock sensors? I think that is what they are. I decided to whack a knuckle on the valve cover that was in my way. Mind you the motor is still in the crate

you couldn't move the crate?! it only weighs like 300lbs! i moved it in to your truck no problem... i was even drunk to...

[transamprincess98]

I've had ceramic pads on my car since I bought it. Couldn't stand the dust of the other pads

I might paint the calipers, but right now I need rotors mine are warped.

[transamprincess98]

how are you doing?

Doing good. Having fun tinkering

You?

[Spaz]

Picture time

show me your !!!

[transamprincess98]

you couldn't move the crate?! it only weighs like 300lbs! i moved it in to your truck no problem... i was even drunk to...

Shut up you! It was butted right up against the rangers twin. I couldn't get any leverage on the bastard

[Spaz]

get "green stuff" pads...

[SSwt00SS]

Should we take bets on what Spaz actually broke before I rip the valve covers off?

whoa, spaz broke your red TA? what's the story...

[Spaz]

Shut up you! It was butted right up against the rangers twin. I couldn't get any leverage on the bastard

WUSS!!! i didn't need any leverage... i just needed beverage...

[transamprincess98]

Did you bother with a compression test?

[Spaz]

whoa, spaz broke your red TA? what's the story...

i gave her my 4th LS1 that i broke...

[Spaz]

Did you bother with a compression test?

#7 cyl was a bit low...

[transamprincess98]

I might have to start drinking. Dad and I were out unbolting stuff and Mikey just stood there smoking like HE was gonna supervise us

[transamprincess98]

#7 cyl was a bit low...

Gives me an idea where to start looking for the culprit

[transamprincess98]

I stepped in a fucking puddle now my pants are all wet

[jad628]

I've had ceramic pads on my car since I bought it. Couldn't stand the dust of the other pads

I might paint the calipers, but right now I need rotors mine are warped.

I take it you are happy with the pads?

I can't feel the warp in the rotor, but I suspect it is on the right side and likely the back. These new rotors look great (hopefully UPS delivered 'em today). I was thinking about painting the rotors orange to match the car, but a friend/co-worker of mine used to be a full-time mechanic and he swore to disown me if I painted 'em orange. They're two-piece, so maybe there is a compromise. I thought about aftermarket calipers, but most of the multiple piston ones aren't really that much better than the OEM one. Too much money for too little upgrade!

[SSwt00SS]

i gave her my 4th LS1 that i broke...

shit that's right the engine. ok i thought you took out her TA and did something to it...lol

[ZAPFOOL!!]

I take it you are happy with the pads?

I can't feel the warp in the rotor, but I suspect it is on the right side and likely the back. These new rotors look great (hopefully UPS delivered 'em today). I was thinking about painting the rotors orange to match the car, but a friend/co-worker of mine used to be a full-time mechanic and he swore to disown me if I painted 'em orange. They're two-piece, so maybe there is a compromise. I thought about aftermarket calipers, but most of the multiple piston ones aren't really that much better than the OEM one. Too much money for too little upgrade!

upgrade your brake lines!!!!

[Spaz]

I take it you are happy with the pads?

I can't feel the warp in the rotor, but I suspect it is on the right side and likely the back. These new rotors look great (hopefully UPS delivered 'em today). I was thinking about painting the rotors orange to match the car, but a friend/co-worker of mine used to be a full-time mechanic and he swore to disown me if I painted 'em orange. They're two-piece, so maybe there is a compromise. I thought about aftermarket calipers, but most of the multiple piston ones aren't really that much better than the OEM one. Too much money for too little upgrade!

do a search for "Green stuff" pads...

[Spaz]

I stepped in a fucking puddle now my pants are all wet

you peed your pants again!!!