Results 1 to 20 of 26
-
03-03-2007, 06:31 PM #1
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
Cross Drill Experiment...gone Right!!
+1 FOR US DO IT YOUR SELF GUYS!!!
STANDARD DRILL PRESS, WITH A 3/16" TITANIUM HIGHSPEED BIT
MEASURING, AND CENTER PUNCH YOUR LOCATION
YOU'LL WANT TO BEVEL THE EDGES WITH A LARGER BIT SO NOT TO SNAG YOUR PADS. (USED A 1/4" FOR THE BEVEL)
-
03-03-2007, 06:37 PM #2
now put it on the mill and cut slots! come on dude its great you did it your self but you can get a set(4) for like $160 for the WS6 store. thats drilled and slotted.
LS7 clutch,01 slave,Corsa 3" stainless exhuast,drilled/slotted rotors + ceramic pads,160 thermo,Mti clear lid,msd 8.5 wires & Ngk plugs...more to come!
www.cardomain.com/ride/2311455
-
03-03-2007, 06:39 PM #3
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
YEA WELL IM A TIGHT ASS. THATS 160 SPENT ELSEWHERE!!!
-
03-03-2007, 06:39 PM #4
i thought about doing that too. we got a machine shop where i work. well at our west plant. i work at the east plant. both on the same road. but anyhow i thought about buying some real good discs and slotting and cross drilling them. after i cross drill them, i'll prolly use a tapered end mill bit so the counter sink is as smooth as it can get. just to make sure there isn't any sharp edge to possibly start a crack.
-
03-03-2007, 06:41 PM #5
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
i have a machine shop in my garage!!! my neighbors hate it, but i can fab plenty, still to come, sfc's, and 10pt cage!!!
-
03-03-2007, 06:45 PM #6
even if it don't work...... oh well. i like doing stuff like that. i do projects all the time. i get it from my granddad. he used to make me and my bro help with projects all the time. we was young but we helped him one time on a tractor project. done what we could but we helped build a frame and used a i believe was a model A engine. that was almost thirty years ago. damn time sure flys
-
03-03-2007, 06:47 PM #7
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
yup. diy ftw
-
03-03-2007, 06:49 PM #8
i went the lazy way and got the ones from the ws6 store 200.00 shipped.........saved me a gang of time
-
03-03-2007, 06:49 PM #9
-
03-03-2007, 06:52 PM #10
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
yea well i get every other week off, so i have plenty of time
-
03-03-2007, 06:55 PM #11
-
03-03-2007, 06:59 PM #12
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
ive warped a couple, but i was in em for all they were worth, at about 140
-
03-03-2007, 07:01 PM #13
-
03-03-2007, 07:06 PM #14
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
cool. you come up with any ideas, let us know!!
-
03-03-2007, 07:53 PM #15
-
03-03-2007, 07:57 PM #16
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
warp is MAINLY caused from heat, which the holes will alleviate!
-
03-03-2007, 08:06 PM #17
The ones on my 94 Firebird warped shortly after I got the car. I replaced them with a good set of cross drilled and they worked great for 9 years. I'm about to do the same with my 02 Trans Am which also has them warped.
-
03-03-2007, 08:38 PM #18
-
03-03-2007, 08:43 PM #19
- Join Date
- Sep 2005
- Location
- TEXAS... U mad?
- Posts
- 6,158
Black / Stryker Blue- 2K WS.6/ 2K9 G8GT
l8r man.
-
03-03-2007, 11:47 PM #20
Looks cool, hope they don't crack.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
oil experiment
By dethinboots in forum GTOReplies: 18Last Post: 10-28-2012, 09:01 AM -
the MP3 experiment (vid)
By Soltakr in forum Almost Anything GoesReplies: 4Last Post: 10-17-2010, 04:01 PM -
Anyone experiment with removing the cats?
By Firebirdjones in forum General HelpReplies: 5Last Post: 03-10-2007, 04:48 PM -
Scientific Experiment
By CAMZARO in forum Drag RacingReplies: 14Last Post: 01-09-2006, 07:05 AM
Bookmarks