1. #15181
    Senior Member ntimid8r's Avatar
    Join Date
    Aug 2001
    Location
    San Diego, CA
    Posts
    8,051

    383 w/Meth & ProCharger
    2001 Camaro Z28

    Quote Originally Posted by djvaly View Post
    no, I did not do it. it is good, but LCA will help in traction I heard, I would just go with Edelbrock Torque Arm. I want to get those.. when I built my tranny next year for 500rwhp+ withstand then I may not stall the tranny, since tq arm will hold the rear and help a lot with the tq.
    but u are M6 anyways so no stall there needed. I have to see, with agressive cam and 3.73 gears
    I think a stall may not be needed since tq arms will be in.
    Take a look at your car on a flat surface and see if the LCA's are parallel to the ground or not. If not then you need relocation brackets.

    When you lower a car, the location of mounting point on the rearend will move. So now your pinion angle is looking too far skyward. The relocation brackets allow the LCA mounting point on the rearend to come back to original (or close to) angle.

  2. #15182
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    Quote Originally Posted by AshleyRocks View Post
    Zaino?? what exactly is that?
    men juice

  3. #15183
    Sweet Lips AshleyRocks's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    37
    Posts
    552

    RED
    99 Trans Am

    Quote Originally Posted by SleeperC5 View Post
    give us some nice pics and I'll wash, wax your car and YOU !!!
    u guys have seen enough pics lol

  4. #15184
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    Quote Originally Posted by ntimid8r View Post
    Take a look at your car on a flat surface and see if the LCA's are parallel to the ground or not. If not then you need relocation brackets.

    When you lower a car, the location of mounting point on the rearend will move. So now your pinion angle is looking too far skyward. The relocation brackets allow the LCA mounting point on the rearend to come back to original (or close to) angle.
    they good, I had them check it.

  5. #15185
    Detailing + Design third_shift|studios's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Age
    43
    Posts
    21,720

    My life is a
    Ben Stiller movie.

    gonna make him a website and integrate a forum like ls1's. he is a pyro tech. and wants to be the number 1 source for firework and pyro tech information on the web.

  6. #15186
    Senior Member SleeperC5's Avatar
    Join Date
    Nov 2006
    Location
    Texas
    Posts
    2,740

    primevil
    2000 FRC

    Quote Originally Posted by AshleyRocks View Post
    Zaino?? what exactly is that?
    it's WAX !!!

  7. #15187
    Senior Member ntimid8r's Avatar
    Join Date
    Aug 2001
    Location
    San Diego, CA
    Posts
    8,051

    383 w/Meth & ProCharger
    2001 Camaro Z28

    Quote Originally Posted by djvaly View Post
    they good, I had them check it.
    But did you check your pinion angle?

  8. #15188
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863

    Thumbs up

    Quote Originally Posted by third_shift|studios View Post
    gonna make him a website and integrate a forum like ls1's. he is a pyro tech. and wants to be the number 1 source for firework and pyro tech information on the web.
    cool, right on!
    let me know if you need web prog services.

  9. #15189
    Visualize°Design°Create SSwt00SS's Avatar
    Join Date
    Dec 2005
    Location
    DFW
    Posts
    9,285

    '18 CTS-V
    '13 ZL1

    Quote Originally Posted by djvaly View Post
    u can buffer it with your sexy lips
    what you mean to ask is:

    can i wax that ass...

  10. #15190
    Senior Member ntimid8r's Avatar
    Join Date
    Aug 2001
    Location
    San Diego, CA
    Posts
    8,051

    383 w/Meth & ProCharger
    2001 Camaro Z28

    Quote Originally Posted by AshleyRocks View Post
    Zaino?? what exactly is that?
    Go to their site Zaino

  11. #15191
    O U 8 1 2 Spaz's Avatar
    Join Date
    Nov 1999
    Location
    over here...
    Age
    46
    Posts
    25,709

    []D [] []V[] []D
    1999 trans am

    Quote Originally Posted by AshleyRocks View Post
    Zaino?? what exactly is that?
    the best car polish EVER!!! and one of our sponsors.. look them up

  12. #15192
    O U 8 1 2 Spaz's Avatar
    Join Date
    Nov 1999
    Location
    over here...
    Age
    46
    Posts
    25,709

    []D [] []V[] []D
    1999 trans am

    Quote Originally Posted by SleeperC5 View Post
    it's WAX !!!
    it's POLISH...

  13. #15193
    O U 8 1 2 Spaz's Avatar
    Join Date
    Nov 1999
    Location
    over here...
    Age
    46
    Posts
    25,709

    []D [] []V[] []D
    1999 trans am

    Quote Originally Posted by AshleyRocks View Post
    u guys have seen enough pics lol

  14. #15194
    Senior Member SleeperC5's Avatar
    Join Date
    Nov 2006
    Location
    Texas
    Posts
    2,740

    primevil
    2000 FRC

    aww hell.... back to work !

  15. #15195
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    Quote Originally Posted by ntimid8r View Post
    But did you check your pinion angle?
    yeah, so no amber kit is needed, they moved the control arms outward a little in front. the back was good on realignment..
    then checked the pinion angle by comparing the relative angle of centerline of the pinion gear and the centerline of the driveshaft.

  16. #15196
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    Quote Originally Posted by SSwt00SS View Post
    what you mean to ask is:

    can i wax that ass...
    hahahah buffer my ass
    hahah, yeah that would work too

  17. #15197
    Senior Member SleeperC5's Avatar
    Join Date
    Nov 2006
    Location
    Texas
    Posts
    2,740

    primevil
    2000 FRC

    Quote Originally Posted by The Real Spaz View Post
    it's POLISH...
    I repeat myself................ it's EXPENSIVE WAX !!

  18. #15198
    Senior Member transamprincess98's Avatar
    Join Date
    Oct 2002
    Location
    Land of Gas Refineries
    Age
    46
    Posts
    3,571
    CT6

    Bite my ass!

  19. #15199
    car enthusiast djvaly's Avatar
    Join Date
    Nov 2005
    Location
    Philly area
    Posts
    9,863
    or buffer my drive shaft

  20. #15200
    Senior Member transamprincess98's Avatar
    Join Date
    Oct 2002
    Location
    Land of Gas Refineries
    Age
    46
    Posts
    3,571
    CT6

    God damn cry babies

Page 760 of 934 FirstFirst ... 260310360410460510560610660710720730740756757758759760761762763764780790800810860910 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 19 users browsing this thread. (0 members and 19 guests)

Similar Threads

  1. Ftw train
    By 402 Guru in forum Almost Anything Goes
    Replies: 16
    Last Post: 12-16-2009, 11:50 AM
  2. Baby run over by train...
    By Firebug in forum Almost Anything Goes
    Replies: 26
    Last Post: 10-23-2009, 07:53 PM
  3. The Flame Train
    By Speedy_Gonzales in forum Almost Anything Goes
    Replies: 347
    Last Post: 04-11-2008, 09:41 PM
  4. Got on the PC train...
    By 99'CajunFirehawk157 in forum Showcar and Detailing
    Replies: 20
    Last Post: 03-03-2008, 02:01 PM
  5. TX mini TRAIN
    By djvaly in forum Texas Members
    Replies: 7095
    Last Post: 01-31-2008, 11:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •