Rotorpros D/s rotors

[Dave Stubbs]

I was looking at a set of rotors form these guys and was hoping someone here had done business with them. 4 rotors for 140.00 seems really cheep. I really don't race the car at a track but I am by no means light on the gas. I have what feels like a warpped rotor ( braking pulses when slowing to a stop ) and need to replace them. Any other options would be great.

TIA, Dave

[third_shift|studios]

too good to be true. pass dude. you want some quality rotors for less, get a few Power Slot rotors from the sponsors. they are decent and very cheap. I think you can get a set of 4 for like 500?

be weary of how some manufactures make their rotors: if the rotor is milled, then they drill and slot it after forming, the rotor is subject to failure due to the stress of the grinding/drilling after formation.

you want a rotor that is molded with the holes and slots during formation-so that it is a stronger piece of metal.

good luck; and smart to ask.

[Dave Stubbs]

So the proper way to drill slot rotors is to cast the holes and slots in the rotor. That makes a lot of sense (less stress from grinding/drilling). I can see now why people would pay more for them. Thanks for the info