Results 1 to 7 of 7
Thread: Porting and Polishing T/B
-
10-23-2005, 05:59 PM #1
Porting and Polishing T/B
Is there any way possible to port and polish your throttle body by yourself? Or is it best to let a LS1 shop or something like that to do it for you? How much would it cost to port and polish the LS1 T/B?
Thanks,
RyAn
-
10-23-2005, 06:08 PM #2
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Read all of it.... http://ls1.com/forums/showthread.php...ghlight=Shaner
-
10-23-2005, 06:21 PM #3
alrite so i take it that its a good thing to do? a while back i read somewhere it wouldnt do anything...i guess times change, and porting MAF housings? good or bad?
-
10-23-2005, 06:30 PM #4
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Originally Posted by LS1Power06
-
10-26-2005, 04:05 PM #5
Contact Mark Shaner at S2 Performance.net
2002 Sunset Orange TransAm 6 spd.
http://www.mustangmods.com/data/1327/dadsigpic2.jpg
-
10-29-2005, 07:05 AM #6
- Join Date
- Aug 2003
- Location
- Honolulu HI
- Age
- 41
- Posts
- 2,486
Pewter- all bore 370 Trans Am
its not that hard to port it yourself. just dont port near the tb blade and make sure the epoxy is dried before you install it. you can also polish the blade and smooth edges along with the bump stop mod.
-
12-30-2005, 03:49 PM #7Highstakes72Guest
Shaner does do awesome work, He fixed some hacked up heads I had bought a few years ago...and I couldnt be happier with them.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: porting disc for head and intake porting
By crossbredfoxbody in forum Parts Wanted / TradeReplies: 0Last Post: 01-10-2010, 11:28 AM -
Porting/polishing MAF Sensor
By BirdCountry02 in forum External EngineReplies: 2Last Post: 06-08-2009, 07:29 AM -
DA Polishing Help
By 98 Purple TA in forum Showcar and DetailingReplies: 6Last Post: 04-18-2007, 08:43 PM -
Getting better at polishing.......
By Y2KPewterSS in forum Appearance SectionReplies: 18Last Post: 02-16-2007, 08:27 PM -
Polishing STB and LCA's
By JonB in forum Appearance SectionReplies: 1Last Post: 12-30-2006, 09:01 AM
Bookmarks