Patriot Performance Stgii Ls6 Heads F/s!!!

[wesTXwitesnake05]

I planned on putting these heads on a 383 but decided to go heads and cam on my stock motor instead. I'm going with a H/C package from texas speed and i need to get rid of these to help pay for it! They are Stage II ported/polished Patriot Performance LS6 heads (6.0 castings) with 650 lift dual springs, 2.055 / 1.57 valves,5 angle valve job, and 59cc combustion chambers. They come in the origional box with Cometic head gaskets and GM head bolts! I paid $1360.00 to get them to my door brand new from patriot. I'm asking $1,000 + shipping(usually about $100 thru fedex)!! i will accept paypal, money order, or cashiers check.

[ace]

Will these work on my 99 SS? Going with MTI R1 cam. 232/236 dur. and 571/578 lift.Will there be any valve clearance problems?

Also they should give me compression ratio of close to 11:1 right?

[wesTXwitesnake05]

they will fit any ls1 98-02. i was told the compression will be around 11:2-2.5:1 with these heads and gaskets with stock pistons. i doubt you would have any clearance issues with that cam. sent you a pm

[SSwt00SS]

what kind of gains were you expecting to see w/these heads? what is the FACTORY compression ratio

would I have any clearance issues running a cam w/a .581/.581 lift? thanks

still for sale?

[wesTXwitesnake05]

what kind of gains were you expecting to see w/these heads? what is the FACTORY compression ratio

would I have any clearance issues running a cam w/a .581/.581 lift? thanks

still for sale?

yes, they are still for sale. The stock c/r is 10.1:1, Gm High Tech did a heads only swap on a stock ls1 and claimed 41 rwhp increase. i belive they tested the same stg2 ls6 heads but with 64 cc combustion chambers. So with the smaller 59cc combustion chambers of these heads you have a higher comprression ratio, which should add a few more hp to that. As far as your cam, its pretty close to the patriot preformance cam they "Flow matched" for these heads: 226/226 Dur. @.050 .585"/.585" Lift 112 LSA so i dont think you would have a problem.




These heads are $1,295.00 - w/o shipping on patriots website: http://www.patriot-performance.com/w...05234&DID=1225

[2000M6SS]

Real nice heads. Wish I had the coin for em.

[wesTXwitesnake05]

SOLD!!!

[wesTXwitesnake05]

Buyer couldnt come up with the money. SO THEY ARE UP FOR SALE AGAIN! $1,000 + SHIPPING

BTW there should be more pics of them on my cardomain page, thanks.

[1fastcamarosss11]

if the price comes down pm me thanks.

[wesTXwitesnake05]

1k PLUS shipping is the lowest i'll go

[Phantompooper]

Wanna trade for some 5.3L heads revalved with Ferrea valves, a Powerdyne kit, or some 42# injectors?

[wesTXwitesnake05]

Wanna trade for some 5.3L heads revalved with Ferrea valves, a Powerdyne kit, or some 42# injectors?

Thanks but no thanks. I would be interested in including these heads in a partial trade for a nice set drag wheels/tires though... some pro stars, bogarts, or ccw drags.

[blackbird 565r]

start you known thread. do not post you parts for sale in someone elses.

[wesTXwitesnake05]

TTT for the night crew

[rickfer]

I'll give you a $1000 shipped. Let me know Thanks Rick

[808ws6]

How much shipped to zip: 96825?

Thanks!

[wesTXwitesnake05]

How much shipped to zip: 96825?

Thanks!

PM Sent

[rickfer]

I'll take the heads do you have a phone number to get ahold of you?
Thanks Rick

[wesTXwitesnake05]

Still for sale... TTT

[gottiman]

you might want to lower the price, patriot is selling them for $995 new fresh from the factory.