Results 1 to 6 of 6
Thread: 2000 LS1 Engine Specs
-
11-16-2006, 07:49 AM #1
- Join Date
- Oct 2006
- Location
- Ft. Smith Ar
- Age
- 63
- Posts
- 9
White- 2000 Trans Am
2000 LS1 Engine Specs
Would any one have the specs for a 2000 LS1, cam, head, from the factory, also I think I allready have the LS6 intake, how can I tell for sure, it looks like one from what I can tell from pictures I've seen of the LS6 intakes but I don't have enough experince to tell. Any help at all would be great, thanks.
-
11-16-2006, 09:35 PM #2
Check this link out...it has all the info you're requesting. http://www.smokemup.com/tech/ls1.php The cam specs on there look pretty accurate but the LSA might be different on the 2000 model.
As far as the intake you can check the part number, take it off and look at the bottom to see if it's flat(ls6) or more concaved(ls1)...also the ls6 manifold doesn't have then EGR pipe going into the top of it behind the throttle body. SLP does sell a ls6 manifold with a provision for the EGR pipe but the fitting is obvious if it's a SLP manifold.
Post a pic of your engine if you can..
-
11-17-2006, 06:15 AM #3
- Join Date
- Oct 2006
- Location
- Ft. Smith Ar
- Age
- 63
- Posts
- 9
White- 2000 Trans Am
Thanks for your help, that web sight gave me what I wanted
-
11-17-2006, 01:22 PM #4
- Join Date
- Nov 2006
- Location
- Indianapolis
- Age
- 61
- Posts
- 5,188
Black- 2000 WS6 6spd Hooker LT
Looking at the web site above I can't find my answer. Does anyone know? My friend will give me his manifold from his 99 Vette. He says it has no EGR. My 2000 WS6 has EGR. I know the better manifold (LS6?) is on the '01 and '02 F-bodies. So, my question is, since the Vettes usually were a year or 2 in advance of our cars, is his '99 intake the same as our '01/'02? Would this be one to get, especially for free?
-
11-17-2006, 03:10 PM #5
http://www.ls1howto.com/howto/geniii...//IMAGE009.jpg
LS1 on the left LS6 on the right
-
11-17-2006, 05:39 PM #6
- Join Date
- Nov 2006
- Location
- Indianapolis
- Age
- 61
- Posts
- 5,188
Black- 2000 WS6 6spd Hooker LT
Thanks. Still, tho, without taking it off can you identify the LS6 manifold by the lack of the EGR tube input just behind the throttle body? I guess also I can ask my friend for a pic of the bottom. That would solve everything. Or have him describe it to me. Both intakes take the same throttle body?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Engine won't run under 2000 rpm
By kempfer99ta in forum Internal EngineReplies: 18Last Post: 02-12-2010, 04:00 AM -
Here’s the In-Depth Specs for the LS1 Engine.
By Elimin8tor Z28 in forum General HelpReplies: 0Last Post: 03-22-2008, 09:22 PM -
Engine Build pics and specs
By Redphoenix1998 in forum Firebird / WS6Replies: 36Last Post: 12-04-2007, 09:35 PM -
Looking for 2001, WS6 Engine Specs.
By midi_2001 in forum Firebird / WS6Replies: 23Last Post: 11-10-2007, 08:04 AM -
LS3 engine specs released today... 436HP
By 2003Firehawk in forum Internal EngineReplies: 24Last Post: 05-01-2007, 07:26 PM
Bookmarks