Results 1 to 5 of 5
Thread: Engine rebuild
-
09-28-2006, 09:49 PM #1
Engine rebuild
Where is a site that can help me find out what are all the parts that i will need to have to do a total engine rebuild? or can someone list them if there isn't that many..... I am seriously thinking about it
-
09-29-2006, 09:19 AM #2
Also...besides say the... Cam Shaft what other BIG job replacements should i look into while i have it all apart.
Not going to stoke this thing.. I can't afford that.
Should i get the crank shaft balanced... heard somthing about that from someone else...is it expensive?
Go ahead and get a new oil pump?
Etc Etc
-
09-29-2006, 11:26 AM #3
Whats wrong with the motor requiring a rebuild? What are you looking too get out of the motor after the rebuild? Are you just wanting too rebuild with stock type parts? The most expensive part will be getting the machining done. Depending on what condition the block is in. Post what your goals are and you will get the info you need.
J2001 SS, Its not the car its the Driver that matters....
-
09-29-2006, 12:50 PM #4
Well the main reason i guess would be that the engine while under WOT after 4700-5000 and above RPM sound like its gat a box of metal marble shooting through it. I "gather" from some that it has to do with something in the crankshaft area(bearings or something). What i don't want todo is be going all out and have the motor go up in a poof of smoke with a loud bang at the same time.
Just being precautoinary...if it doesn't cost "tooooo..." much for all the normal replacement items then i will more thah lickley port/polich the heads and put in a new cam and mabye a couple other things that i don't know about yet. I have a 1500$ budget that I would like to stay with in.
As far as the cam i don't want anything crazy. Still want a Daily Driver. but i want to be able to put the smack down on some other guys out there.
Also with the cam i will need some help picking the right one
Total HP/TQ making mods will include
CAM
Port/polish heads
Headers(LT)
intake maifold
TB
rockers
injectors - if needed to get to the 400HP at the wheels marker i want to get to
underdrive pully
--- Think that is about it...
While i have the engine apart should i replace the lifters too? What SHOULD be replaced while i have this thing apart?
-
09-30-2006, 12:58 PM #5
How many miles are on the motor and are you sure its not just a valvetrain issue. In the parts you listed will cost you your budget alone. Is there a sep. budget that you will be breaking into? Since your planning on a new cam/head work i would suggest you upgrading your valvetrain anyhow, new springs,push rods, etc. As far as a cam i would suggest callin the manufacturer of the cam you wanna purchase too figure out what they reccomend and if you will need to get it tunned after the instail. Is it a m6 or a4? If auto you would also benefit alot from a stall.
If you pick up a "rebuild" kit it will come with new lifters and new oil pump, pistons,rings,gaskets, freeze plugs. They run about 1200.
J
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Engine Rebuild
By Keystone4904 in forum Firebird / WS6Replies: 0Last Post: 03-13-2010, 07:29 AM -
engine rebuild
By redLss1 in forum General HelpReplies: 2Last Post: 09-26-2009, 05:54 PM -
Question: Engine rebuild =]
By wanna_lS1 in forum Firebird / WS6Replies: 0Last Post: 05-17-2008, 06:35 PM
Bookmarks