Many Low Mile Performance And Stock Parts For Sale

**BJC51984** · 09-19-2006, 07:25 PM

Race-built short tail TH400 w/ TCI Reverse Manual Valvebody, with Transbrake, and HD sprag front pump roller rear bearing new clutches gaskets & seals deep alum pan all FRESH just done (built professionally by AC Transmissions near Philly, shop has 30 year experience) $1000.00 plus shipping arrangements

TCI Super Street Fighter 4000 stall 4l60e Torque Converter w/800 miles on it. $380 + shipping PENDING

Brand New LS6 valvesprings good to .550 lift that came on TSP heads..no miles...$50 + shipping

Harland Sharp 1.7 Roller Rocker Arms w/ 3k miles $220 + shipping

All stock parts are off a 2000 Camaro SS w/38k miles

Stock Aluminum driveshaft w/4l60e yoke and 1310 to 1350 conversion ujoint $100 + shipping
A4 trans dipstick $15 + shipping
Stock LS1 cylinder heads fully assembled $175 + shipping
LS1 Intake manifold $50 + shipping
Stock pushrods $10 + shipping
LS1 coolant pipes $10+ shipping
Stock LS1 oil pump $25 + shipping
Stock flexplate $25 + shipping
Stock t-stat $10 + shipping
Stock LCAs $15 + shipping
Stock panhard bar $15 + shipping
Stock Tunnel Brace $10 + shipping
Stock camshaft $25 + shipping
Factory Fuel Rail $45 + shipping
Factory airbox lid $10 + shipping
Stock MAF ends $10 + shipping
Factory monsoon delco amp $15 + shipping
T-Top holders $15 + shipping

Will accept paypal on everything but trans, money order otherwise PICS AVAILABLE UPON REQUEST Will combine shipping and local pickups welcome in central NY state
PM Me with any questions also listed on ls1tech where i have great feedback

**smax** · 09-24-2006, 02:01 AM

interested in the stall. please let me know if sale falls through.

**drb131s** · 09-24-2006, 11:36 AM

ill take the amp for 15 + shipping

**Z28pwrHecz** · 09-24-2006, 03:48 PM

what does the slp cold air induction include and what year are those headers for.

**Thegr8schlotzky** · 09-24-2006, 07:49 PM

how much would shipping on the driveshaft be to 97304?

**sammy burks** · 09-25-2006, 01:58 PM

how about $45. for fuel pump shipped to 65810

**BillW** · 09-26-2006, 07:06 AM

Sent you

**LS1-IROC** · 09-27-2006, 02:02 PM

I'll take your alternator for $45 shipped to Michigan Let me know.

Thanks,
James

**MassGaskets** · 10-02-2006, 12:07 AM

Originally Posted by Z28pwrHecz

what does the slp cold air induction include and what year are those headers for.

I need the same info pls. I'm looking for a good condition LS1 lid.

**gmpower** · 10-02-2006, 01:56 AM

do you have the maf sensor?

**pedrojcmo** · 10-02-2006, 01:56 PM

Did you sell the Fuel pump yet?

**'02 WS6** · 10-02-2006, 05:55 PM

pics of the harland sharp 1.7's please! aggieguy8102@yahoo.com

**Silver Streak** · 10-02-2006, 06:10 PM

Originally Posted by Z28pwrHecz

what does the slp cold air induction include and what year are those headers for.

Where does it say ANYTHING from SLP? Only thing I can see is the stock airlid.... and it says all stock parts are off an '00 SS.

**BJC51984** · 10-02-2006, 07:27 PM

There was an slp cold air induction I had for sale on here but I sold it today and removed it from the list

**Silver Streak** · 10-02-2006, 07:28 PM

Ah, ok.. I'm sorry.

**MassGaskets** · 10-03-2006, 03:48 PM

Originally Posted by BJC51984

There was an slp cold air induction I had for sale on here but I sold it today and removed it from the list

Has it been shipped?

**BJC51984** · 10-11-2006, 01:07 PM

UP top again

**real driver** · 10-11-2006, 07:21 PM

Is the intake manafold the ls6 style? & if so does it come with the throttle body?

**Sunset T/A** · 10-12-2006, 04:36 PM

Can you give me a little more info on the LS6 springs?

**acrylicophobia** · 10-17-2006, 08:39 PM

On the t-top holders, are those the two plastic pieces that are down in the back hatch area, and do you know if they'd be the same as the ones in a Firebird? If so, I could really use them. I guess if you have a picture, that'd help.