Results 1 to 4 of 4
Thread: will 00-02 headers fit a 98-99??
-
09-22-2006, 11:51 AM #1
- Join Date
- Aug 2005
- Location
- florida
- Age
- 42
- Posts
- 113
will 00-02 headers fit a 98-99??
summit sent me the wrong headers. im having the egr and rear o2's deleted from the comp with a base tune. so can i use the 00-02 headers???
-
09-22-2006, 02:16 PM #2
- Join Date
- Apr 2006
- Location
- Moon, PA
- Age
- 42
- Posts
- 68
White- stolen by "Josh Steel"
That's a great qustion. I would try to look colsley at them. They should fit the engine just fine of course. But it is rather unknown that there have been slight chassi changes over the years 98-2000. I know 98-99 are Identical as are 00-02. The changes came to the drivers side of the undercarrage. Some of you may have found this out when installing SFC's. I don't know that the "Slight" change would effect the exaust though.
-
09-22-2006, 02:18 PM #3
- Join Date
- Apr 2006
- Location
- Moon, PA
- Age
- 42
- Posts
- 68
White- stolen by "Josh Steel"
The main thing you want to me concerned with is the lenght of your headers and weather or not you can retain your Y pipe. I would cheek for genral length if it's close the the same 0-1.5in differance go for it you can make up as much as 2in in ither direction with the set up of your exaust.
-
09-22-2006, 02:41 PM #4
yes, the headers will fit. the only difference is where the EGR and AIR tubes would hook up. but, you are blocking them off and deleting the codes, so doesn't matter.
Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
mac mid headers or lt headers 2002 camaro with y pipe
By chief98ls1 in forum Parts Wanted / TradeReplies: 2Last Post: 07-25-2012, 04:36 PM -
Question: Longtube headers or short headers?
By 98maro in forum General HelpReplies: 16Last Post: 03-01-2010, 05:25 AM -
which LT headers?? TOO MANY DAMN HEADERS TO CHOOSE FROM!
By bad@ss mike in forum External EngineReplies: 15Last Post: 03-26-2006, 10:59 AM -
headers for sale? which headers should i buy?
By wooten in forum External EngineReplies: 14Last Post: 02-19-2006, 11:18 AM -
Has Stainless Works Headers become the Top Headers of all?
By Sunset T/A in forum External EngineReplies: 3Last Post: 12-04-2005, 06:54 AM
Bookmarks