Results 5,121 to 5,140 of 7122
-
06-14-2016, 06:04 PM #5121
-
06-15-2016, 11:19 AM #5122
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Some color done minus touch ups and black in the remaining letters, then the final clear.
Sent from my HTC6535LVW using Tapatalk1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
06-21-2016, 10:24 AM #5123
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
There is Christmas in June.
My family ordered almost all of this without me knowing it.
My wife left an envelope that I wasn't suppose to open till Fathers Day before she left to visit her mom in Panama. Ok I cheated and opened it on Saturday. Note said order your tires...
This was also from her, my son & niece. They ordered me a complete rack & Pinon, new e brake shows and all the stuff I need to convert all my lights over to HID & LED's
-
06-22-2016, 02:19 AM #5124
Damn, Scott - that's awesome! Must be that's your family's way of keeping you out in the garage.
-
06-25-2016, 01:25 AM #5125Lid, Throttle Body, LS6 Intake, Heads, Cam, Magnaflow, LS7 Clutch, SFCs, STB, Panhard Bar, Strano Springs, Hollow Sway Bars, Poly/Roto LCAs, Konis, MGW Shifter
-
06-25-2016, 02:03 PM #5126
Took my 30th Ann. Ed. white TransAm out for a joy ride after being away for a few weeks in a city with no car. Chomping at bit.... Car seems to be getting better with each aggressive drive after all the new fluids and tires rotated. Wow.
p.s. is pollen as bad as salt on chrome? Only bad part of being away was seeing chrome pitting and peeling on my Harley wheel on my return?!?! Was detailed AFTER winter salt, so must be pollen collecting on low side of rim?
-
06-26-2016, 02:29 PM #5127
I didn't think that pollen would hurt anything... hard to tell though.
-
06-26-2016, 04:08 PM #5128
Assuming your Harley is being parked outside to cause your pollen problem. If so, having lived in the south for a number of decades where the Georgia pine tree pollen would get a quarter of an inch deep in the spring, I would say no, your problem is not pollen. It could be that either your chrome was already in trouble and just finally gave out or you have a neighborhood dog that likes to mark your wheels for you. Urine is definitely not good for chrome.
-
06-27-2016, 04:01 AM #5129
I begun my suspension work. I bought pre-owned 20k mile Eibach Prokit springs with Bilstein HDs. Got the rear done very fast. Did front left last night with girlfriend helping. Going to do the front right today. Might be ordering adjustable LCAs however. The rear end has a little hop. I have a adjustable Panhard bar ready to go when the subframe connectors go in.
2000 Trans Am WS.6 M6
SLP lid & bellow w/ K&N, GMMG catback w/ Corsa Clones, UMI SFC, UMI Adj. Panhard, UMI Adj. TQ arm w/ relocation kit, QTP Longtube headers ORY, LS6 intake, EGR/A.I.R delete.
Eibach prokit, Bilstein HDs, Nitto NT555s, skip shift elim, whiteface overlays, 20% tint, matte black decal/overlays
YouTube.com/DarrenWS6
-
06-27-2016, 06:52 AM #5130
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I tackled the rack & pinon, new ps pump hoses and install most of my LED lights for the new smoked out side markers and tail lights. Only lights left to upgrade are the front DRL's and both headlights. Waiting on my kits from DDM Tuning to get here. My low's should be here today, not sure when the high's will get here. Coming from China. Tried to install my wideband but the shop that welded the bung in put the cap in to soon and the plug didn't want to come out. I broke 3 bits trying to get it out. Took it to them this morning and even they had fun getting it off using some of the biggest vice grips I've seen. This time they used a lot of anti-seize to ensure it will come off when I get home tonight.
Here are some pics.
I'll post more once all is done in a how to thread later.Last edited by SMWS6TA; 06-27-2016 at 06:57 AM.
-
06-27-2016, 03:53 PM #5131
-
06-27-2016, 04:56 PM #5132
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Looking at tires for my TA anyone know if 275 50 17 tires would fit in the front height wise on a car lowered 1.25". Same with the back but 325 45 17.
Sent from my HTC6535LVW using Tapatalk
-
06-28-2016, 06:11 PM #5133
- Join Date
- Aug 2005
- Location
- Urbandale, IA
- Posts
- 150
Red- 2002 Trans Am WS6 (M6)
I know this isn't what you asked but I have 275-40 in the front and 315-35 (both 17's) in the back. Car is lowered more than an inch and a quarter with no issues. Hope someone can give you an answer to your actual question.
-
06-28-2016, 06:14 PM #5134
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
I know those fit which is why I asked about the bigger side wall. I've had the same with 335s on and they fit but not with as big of a side wall as what I asked.
Sent from my HTC6535LVW using Tapatalk
-
06-29-2016, 04:37 AM #5135
-
06-29-2016, 04:48 AM #5136
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Yeah I have gap even lowered plus I figure it would be good for my set up for the track.
Sent from my HTC6535LVW using Tapatalk
-
06-29-2016, 04:01 PM #5137
- Join Date
- Jul 2009
- Location
- Albertville, Alabama, United S
- Posts
- 21
black- 1998 ws6 trans-am
looks like I'm finally having to replace or rebuild the 10 bolt, I've been cranking it but haven't been driving it for about 2 months so hubby said he would drive it so he took off and came right back saying it sounded like something was loose when you turn left so I took off in it and it does sound like that but I jacked it up and could not find anything loose, I would have to say that the pinion seal is leaking for a while now but I keep the fluid full, but it has 102.000 on it and had twin turbos at one time and was at the drag strip more than a few times so I guess now I'll check the u joints then go and take off the cover and see how much metal is on the magnet, it's a 6 speed this is also 2nd motor waste gate stuck and boom went the 1st motor so bought a 2000 corvette motor it only has 23,438 miles on it, unfortunately, the rest of the car has over 100,000 on it, so off to the drawing board. thanks for reading my ranting, everyone have a good day!
Last edited by fws98ws6tt; 06-29-2016 at 04:04 PM. Reason: spelling
Firewolf ( All My Children Have 4 Paws ) or 4 wheels
-
06-29-2016, 04:16 PM #5138
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Does it make a whining sound while turning or anything?
Sent from my HTC6535LVW using Tapatalk
-
06-29-2016, 04:35 PM #5139
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
Started assembling my brakes to put on my member.
The rotors are quite a bit bigger than stock
And thicker too
Sent from my HTC6535LVW using Tapatalk
-
06-30-2016, 02:29 AM #5140
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks