Results 1 to 18 of 18
Thread: 1998 Camaro PCM ECU Computer
-
06-29-2008, 09:47 AM #1
1998 Camaro PCM ECU Computer
Question: I am looking for a 1998 Camaro V8 Computer, the PCM or ecu, whatever you want to call it. All I can find are V6 ones for the 98. I know the 98 has a different computer then 99-02.
Does anybody know where to find one, and also is there a cross reference for the part, like would a 98 tahoe with a V8 have the same PCM? That kind of thing, let me know if any of you are experts on this, or possibly know the location of a 1998 Camaro PCM. I have searched ebay, all V6s... Thanks for the help!
-
06-29-2008, 12:08 PM #2
-
06-29-2008, 12:27 PM #3
The main PCM that does the engine control. The one that is tuned basically for engine performance. Its in the back corner of the engine bay, passenger side.
-
07-01-2008, 12:07 PM #4
Any ideas, can anybody confirm if a 3.8 computer will work with the LS1 computer? Thanks for your help.
-
07-01-2008, 05:35 PM #5
No, you need a 98 LS1 PCM from a 98 Camaro or Firebird equipped w/ a LS1.
-
07-06-2008, 08:14 AM #6
Ok sounds good, now its just a question of where to find one. Anybody have one sitting around or know of a place that sells em? Thanks!
-
07-06-2008, 10:19 AM #7
-
07-06-2008, 08:30 PM #8
Perharps you could try asking this guy. I know he makes computer tunings maybe he can help you out.
http://www.autocomputertech.com/
-
07-08-2008, 09:10 PM #9
- Join Date
- Sep 2006
- Location
- illinois
- Posts
- 30
black- 2001 Trans Am
Hi, My son just bought one from this person. He has a 2001 Trans Am. It'
s a used ECM flashed to his car. http://stores.ebay.com/SpareECM His old ECM went out on him. He'd buy another from him, even if it's used. 1 year warranty. Hope this helps. I liked he has a phone # to call. The ECM on your car has a number. Thats what you need when you call. Dave
-
07-08-2008, 09:16 PM #10
i thought the ecu on late model ls1's needed all the components of the original ecu in order to work, in other words your ecu will not work on my car cause its linked to the ignition etc of your car ?
-
07-08-2008, 09:33 PM #11
- Join Date
- Sep 2006
- Location
- illinois
- Posts
- 30
black- 2001 Trans Am
Hi, My son was asked the vin and the part # on his old one. They programed it to his vin. His cost was just over $100.00 sent with shipping. Got it, plugged it in & good to go. I think on the IGN keys security thingy. Guessing. It is another computer that does it? I'd ask. No problem when he replaced it with the old one. Dave
Last edited by locodave; 07-08-2008 at 09:36 PM.
-
07-09-2008, 10:11 AM #12
need to do a crank re-learn when putting in a new PCM.
If you aren't getting a code, it doesn't mean that you are fine, it likely means that the person who sent it to you turned off error-reporting for that DTC so that you don't know it's an issue.
-
07-29-2008, 01:44 PM #13
- Join Date
- May 2007
- Location
- Chas. WV 25303
- Posts
- 66
WHITE- 2002 Z28
1998 Pcm Serv. No. 16238212
do not meet the requirements for selling
http://www.ls1.com/forums/showthread.php?t=68924Last edited by mrr23; 07-29-2008 at 05:30 PM. Reason: identification & clarity
-
07-29-2008, 06:03 PM #14
- Join Date
- Sep 2006
- Location
- illinois
- Posts
- 30
black- 2001 Trans Am
Hi Spordee, Gee wizz, Glad you pointed that out to me. Son-of-a gun. Do you think for a minute I'd give a spam sight for someone to go to? Bought a ECM from that guy & happy with it. Thought it was good to pass on any info. For something that might help others. I would of called up someone here that did the same thing, but after scrolling thru the posts. I didn't see anyone that did this. Tell you what. If your ECM craps out someday, don't give that guy a call. Search like I did in this sight for someone to go to, other than the dealer. Better yet. Just pay the tow bill & cart it off to your nearest dealer. Bring about $600.00 not including the tow bill. And Frost, sorry if I didn't reply on your post. It did have to relearn. Didn't take to long initally, but for emissions testing. Think the same as the original. Have to use the scan tool & see if it's ready. Dave
Last edited by locodave; 07-29-2008 at 06:07 PM.
-
12-21-2015, 03:58 PM #15
- Join Date
- Dec 2015
- Location
- Hornell, NY
- Posts
- 1
Black- 1998 Camaro
98 rs
after receiving a 98 rs for basically free, I stripped it down and now a rolling chassis with a full aftermarket suspension. my big question is what parts/process I need for the wiring harness/computer process. I have an lq4 out of my neighbors express van that I plan to build possibly with boost. The suspension, mounts and driveline are all pretty self explanatory but I'm not exactly sure of what route I have to take with that. A lot of people told me it isn't worth it but I got a solid car for less than $400 and got the motor for $500 so I figured why not? Please tell me I'm not in over my head...
-
12-27-2015, 05:27 AM #16
- Join Date
- Apr 2010
- Location
- Alabama
- Posts
- 3,625
Black/ Silver- 98 TA WS6/ 01 C5 Corvette
since you have it stripped down that far it would be far better and easier to put a pcm from a 99-02 ls1 and get the wiring harness as well the gauge cluster from a 99 and install it for your build. IIRC regardless you will have to do this if you plan on using a lsx motor and computer as the computer and wiring harness isn't compatible with the 3.8s stuff. i would say you are far from being over your head though.
1998 Trans Am WS6 - Phantom
421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
(Coming Soon) BMR DSL, UMI TQ Arm
421 LQ9 14.8:1 on E85 Build/
-
12-27-2015, 05:57 AM #17
What year is the LQ4?
-
12-29-2015, 08:01 AM #18
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ISO 1998 trans am , camaro ls ECM and only 1998 ECM for ls1
By knock0991 in forum Computer & TuningReplies: 2Last Post: 07-24-2015, 06:59 AM -
Help: 1998 camaro with a 2000 camaro engine
By ortiztimothy in forum General HelpReplies: 8Last Post: 10-07-2014, 06:56 AM -
computer wizards - any way to watch videos which are on my computer on my tv?
By SLIM_DURST in forum Almost Anything GoesReplies: 10Last Post: 10-29-2007, 03:50 AM -
need 97 camaro distributor and 350 turbo and computer for sale
By birdmanta in forum Cowhands, Local Parts and Fish BaitReplies: 1Last Post: 09-06-2007, 08:40 AM -
WTB 6 speed computer from 98/99 camaro firebird Service #16238212
By LS1_MonteSS in forum Parts For Sale / TradeReplies: 0Last Post: 03-27-2006, 08:12 PM
Bookmarks