What did you do with your Trans Am today?

**udy2554** · 07-19-2015, 02:08 PM

👍😎. I gotta jam my '80s metal and hair bands!😝

***SMWS6TA*** · 07-19-2015, 03:10 PM

I think this doohicky was a problem......

It's nice that family gets exactly what you tell them for your B-day. My niece gave me these, MSD Super Conductors for Trucks. Makes it a hell of a lot easier to get #8 and they bend enough to get away from the exhaust tubes.:

I also cleaned up some 5.3 coils my son got me and threw them on as well. Once it's retuned I'll get the full benefits.

Also added 3 layers of weatherstrip to the air lid so the clamps will hold down now.

Didn't get to wire harness for the fuel pump because it's dropping lightning outside my house.

**naperws6** · 07-19-2015, 03:10 PM

Went grocery shopping today

**DarrenWS6** · 07-19-2015, 05:04 PM

The speaker on my drivers side wall rattles awfully. This will be something I will need to tend to. I often use the system when cruising in 6th gear when I can't hear the engine.

I pressure washed mine down and wiped dry with a plush micro fiber. It got filthy and rained on a few times this weekend. Normally I would wash it properly but i'm in a bad mood tonight and just wanted to get done.

**DarrenWS6** · 07-19-2015, 05:06 PM

Originally Posted by udy2554

Lots of flooding here in Naples! I inadvertently took her mudding!😳

**kingls1** · 07-19-2015, 05:44 PM

Originally Posted by DarrenWS6

The speaker on my drivers side wall rattles awfully. This will be something I will need to tend to. I often use the system when cruising in 6th gear when I can't hear the engine.
.

Here you go Trans Am Page this is what I was telling you about. I got the level 2 ask them if or when they may be running a sale they often do...completely satisfied...

**udy2554** · 07-19-2015, 05:51 PM

Speaker swap pile-o-parts!

Jammin' for the rear end gear oil swap!

**99'CajunFirehawk157** · 07-19-2015, 05:53 PM

Dropped the front this weekend with some BMR springs, back this coming weekend

**98TransAmWs-6** · 07-19-2015, 05:59 PM

Thinking about getting some optic armor windows and windshield for the TA since where I live in TN there is no inspection of any sort lol. The stuff is stronger and lighter than glass so I could loose some serious weight off the TA.

**udy2554** · 07-19-2015, 06:00 PM

Gear oil swap!

TAPerformance girdle was an unexpected surprise!

Yahoooooo😋

**pajeff02** · 07-20-2015, 02:56 PM

Where did you find the pump thingy for the gear oil?

**udy2554** · 07-20-2015, 05:03 PM

I got it a few years back, maybe Advanced Auto?

I came with 2 hoses, one for quarts and one for gallons! The pump is threaded to fit both also! I still get gear oil down my arms all the way to my pits!☺️

It's pretty handy! I submerge my other Toy and do a lot of gear oil changes!😝

**pajeff02** · 07-20-2015, 05:05 PM

I'll have to keep an eye out for that. Suction gun works great, but I have to unscrew the top and pour the gear oil into the canister before injecting it.

**udy2554** · 07-20-2015, 05:16 PM

Your way sounds easier! I think I gave up counting how many pumps a quart takes...80 or so? Laying on my side...well lubricated arm pits...

**RONS98TA** · 07-21-2015, 02:58 AM

I have the very same pump. Bought it 5+ years ago also. It has to be pepboys or napa. Pretty much the only places I buy my stuff. That pump is awesome. Filling rear end fluid is a breeze.

**RONS98TA** · 07-21-2015, 03:02 AM

This is pretty close. Napa part number (BK 7511196.)

**99'CajunFirehawk157** · 07-21-2015, 07:10 AM

Since I am home waiting on an a/c repairman to come fix my home a/c I went out in the garage and swapped out my rear springs for some bmr lowering springs, pretty easy job on the rear.

**DarrenWS6** · 07-21-2015, 01:54 PM

Originally Posted by 99'CajunFirehawk157

[CENTER][B]Since I am home waiting on an a/c repairman to come fix my home a/c

I went out in the garage and swapped out my rear springs for some bmr lowering springs, pretty easy job on the rear.

Has a nice stance!

**udy2554** · 07-21-2015, 03:16 PM

I wish I could lower mine, but the roads around here would be VERY unforgiving! I'd like to "tighten" things up a bit though! Maybe next year?😜

I got home from a 9.5hr work day! Got home and went for a ride! Did a burnout, hit 100mph, cruised home at 60, opened b-day presents, showered, now dinner and cake! So far a pretty good day!😊

**DarrenWS6** · 07-25-2015, 05:39 AM

I want to lower mine, bu only a hair. Not a full 1.5" or anything crazy. The idea of getting it onto a trailer with ease sounds nice. Not that I have a trailer but someday would be nice. The Strano springs sound like my winner, good firmness and still comfy, not a drastic drop.

Yesterday evening I took these.