Results 1 to 20 of 25
Thread: EGR and AIR parts needed
-
11-04-2014, 06:36 AM #1
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
EGR and AIR parts needed
If anyone has the complete EGR assy for a 98 TA I'm in need of one bad. I also need the air check valves and hoses. I deleted that off my car when I put headers on it and it won't pass "safety inspection" where I live.
2001 B4C Camaro
LS1 lid
Speed Engineering 1-7/8 headers and y pipe
Borla Catback
SOLD!!!
1998 Trans AM M6
Corsa Catback,Kooks 1-7/8 Long tubes,Kooks 3 inch Y-Pipe with High Flow Cats, MGW shifter, 4:10's
-
11-04-2014, 06:43 AM #2
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
I think I still have the air pump and some of the tubing in my garage...i'll have to take a look when I get home. I have no clue on whether or not the pump itself works because it was tuned out and the fuse was pulled when I bought my car.
-
11-04-2014, 06:46 AM #3
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
I don't need the pump. This is just for "looks" to make my local inspectors happy. I've had all that tuned out too.
You have the check valves for the air system?
-
11-04-2014, 06:49 AM #4
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by VengeanceSCCA and Car Show Approved
2019 Ram 1500 Crew Cab Laramie Limited
2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
06 Quad Cab HHHHemi - Sold
99 Hugger Orange Camaro - Sold
97 Camaro - Sold
-
11-04-2014, 06:55 AM #5
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
Lol. Do it!!!
-
11-04-2014, 06:56 AM #6
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
do you have any of the EGR block off stuff in your car? Header block off plate or intake block off?
-
11-04-2014, 07:04 AM #7
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
Yeah. I just used a rubber freeze plug for the intake
-
11-04-2014, 07:09 AM #8
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
what about on the passenger side header? Do you have that block off plate installed?
-
11-04-2014, 07:10 AM #9
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
Yeah. I bought them from summitt. They were cheap.
-
11-04-2014, 07:20 AM #10
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
alright...i'll go home and look at yanking this EGR system out for you because I dont need it and I'll take a look at what secondary air stuff I have.
-
11-04-2014, 07:20 AM #11
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
Cool. Thanks.
-
11-05-2014, 09:27 AM #12
- Join Date
- Oct 2005
- Location
- Arkansas
- Posts
- 1,235
- iTrader
- 8 (100%)
2000 Camaro SS- '02 Z28 parting-out
Let me know if you still need
-
11-05-2014, 09:49 AM #13
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
I do.
-
11-05-2014, 12:39 PM #14
- Join Date
- Oct 2005
- Location
- Arkansas
- Posts
- 1,235
- iTrader
- 8 (100%)
2000 Camaro SS- '02 Z28 parting-out
Alright. Let me dig mine out this weekend. I should have everything you need. Once I get it out I will have a better idea of how much it will cost to ship. Not worried about making much money off it but will need to cover shipping and put a couple of dollars in my pocket.
-
11-05-2014, 01:01 PM #15
- Join Date
- Jan 2014
- Location
- Raleigh,NC
- Posts
- 66
- iTrader
- 1 (100%)
Black- 2001 B4C Camaro
No prob. Just let me know.
-
11-08-2014, 11:45 AM #16
-
11-08-2014, 01:48 PM #17
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
- iTrader
- 0
Black / White- '00 T/A M6/'19 Hemi Truck
Checked mine this morning and I have basically the exact same thing that he does.
-
11-08-2014, 02:39 PM #18
-
11-08-2014, 06:23 PM #19
- Join Date
- Oct 2005
- Location
- Arkansas
- Posts
- 1,235
- iTrader
- 8 (100%)
2000 Camaro SS- '02 Z28 parting-out
EGR and AIR parts needed
let me see what size box I can get it in so I can get an idea on shipping.
-
11-09-2014, 12:10 PM #20
- Join Date
- Oct 2005
- Location
- Arkansas
- Posts
- 1,235
- iTrader
- 8 (100%)
2000 Camaro SS- '02 Z28 parting-out
EGR and AIR parts needed
looks like I can send it standard mail for $12 of priority mail for $13. let's just call it an even $20 and I'll ship it out. look at the pic of the small pieces. if there is anything in that pic you think you might need let me know and I'll will throw it in for the same price. the big "t" with the vacuum connection is part of the air system you might need. and I think it mounts on one of those metal brackets.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Parts needed!
By 454transam in forum Parts Wanted / TradeReplies: 0Last Post: 05-19-2010, 11:34 PM -
TA parts needed
By axcellclan in forum Parts Wanted / TradeReplies: 0Last Post: 04-14-2008, 07:54 AM -
what parts needed for t/a
By Mike Mlodecki in forum Firebird / WS6Replies: 9Last Post: 10-31-2007, 02:24 PM -
LS1 Parts needed
By lostokie in forum Parts Wanted / TradeReplies: 5Last Post: 05-23-2007, 10:27 AM -
Parts Needed!!
By YellowTA in forum Parts Wanted / TradeReplies: 1Last Post: 08-25-2005, 08:48 PM
Bookmarks