Results 1 to 2 of 2
Thread: LE3 heads vs TF
-
10-05-2014, 09:52 AM #1
- Join Date
- Jun 2014
- Location
- Ohio
- Posts
- 8
LE3 heads vs TF
Im in market for heads. lloyd recommended a set of trick flow heads fully port and polished with 2.08/1.60. Will the LE3 heads still be making good power at 7k rpm? Or should i spend the extra $600 for the tf heads.
-
10-05-2014, 11:48 PM #2
It's going to depend on the cam and what the flow numbers of the particular heads are. Don't get too wrapped up in wanting your motor to rev to a specific rpm. And the number one person you need to ask these questions to is the guy porting the heads. He knows what his heads will flow. Talk to him, and whoever you're getting your cam from, and tell them both what car the motor is in and what your power goals are. They should ask you a lot of specific questions about your setup and goals.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Late-Model GTO Heads and Cam - The Voice Inside Our Heads, P
By Ed Blown Vert in forum GTOReplies: 0Last Post: 03-16-2011, 09:30 AM -
Late-Model GTO Heads and Cam - The Voice Inside Our Heads
By Ed Blown Vert in forum GTOReplies: 0Last Post: 02-04-2011, 02:00 PM -
AFR heads VS. Ported and beefed up stock heads.
By hutcher04 in forum Internal EngineReplies: 10Last Post: 03-14-2010, 08:27 AM -
New Heads or Port/Polish Stock Heads?
By Black02LS1 in forum Internal EngineReplies: 32Last Post: 06-22-2007, 11:29 PM
Bookmarks