Frankenbird Project

**tatertot91** · 08-21-2013, 03:11 PM

Hahaha nice tool holder. Sounds great

**RONS98TA** · 08-22-2013, 03:22 AM

Originally Posted by ls1camino

Hoping to make it down for Fall Cruise Weekend in October.

I have a wedding to go to of a good friend of mine 10/11/13, so the fall cruise weekend in OC is not gonna happen for me this year. If I wasn't gonna be in myrtle beach I would def be down there though.

**cpop98ws6** · 08-22-2013, 04:26 AM

I'll be at the fall cruise in ocmd, thrus to Sunday. Just not sure where I'm staying yet.

**ls1camino** · 08-22-2013, 04:40 AM

Originally Posted by cpop98ws6

I'll be at the fall cruise in ocmd, thrus to Sunday. Just not sure where I'm staying yet.

I have a house we rent...$125 a night. We split it between who all shows up. We had 12 people in May. That comes out to $30 a person for the weekend.

**ls1camino** · 08-25-2013, 08:56 AM

Made a switch panel...I'm ok with it for now. I'll make something different down the road once I figure out exactly how I can improve on this panel.

**INMY01TA** · 08-25-2013, 09:15 AM

Sounds good. Is that you sittin in the car? He looks huge. Looks like he's wearing that car like a suit.

**ls1camino** · 08-25-2013, 09:18 AM

Originally Posted by INMY01TA

Sounds good. Is that you sittin in the car? He looks huge. Looks like he's wearing that car like a suit.

No, that's my friend Chris. He is rather large.

**pajeff02** · 08-25-2013, 10:03 AM

Which switch turns on the flux capacitor?

***SMWS6TA*** · 08-26-2013, 06:17 AM

so where does the KITT interface go?

I guess no need for music when you have headers

**LimeNine** · 08-26-2013, 04:05 PM

"ghetto lean"? Only if you're cruising in the looser lane, mines set up perfectly for the left lane slope

**ls1camino** · 08-26-2013, 05:29 PM

Originally Posted by LimeNine

"ghetto lean"? Only if you're cruising in the looser lane, mines set up perfectly for the left lane slope

what?

**ls1camino** · 08-30-2013, 09:27 AM

Finished wiring the switch panel. It wasn't difficult, just tedious. My neatness OCD didn't help matters much either.

**jonnyman** · 08-30-2013, 01:52 PM

I'm really impressed with your work!! wish I was as capable and patient as you. Great work so far!

**pajeff02** · 08-31-2013, 04:23 AM

Nicely done, J.

**Y2KArcticSS** · 08-31-2013, 01:47 PM

That does look tedious. Good job.

**LimeNine** · 09-02-2013, 10:55 PM

There was talk about ghetto lean - you responded with torque arm adjustment or something. . . Referring to the right rear sagging by an inch or so, like my Z28 does, but I hardly notice that difference while cruising in the passing lane .... . . never mind - carry on.

**ls1camino** · 09-13-2013, 02:36 PM

Finished the CTS-V front brake upgrade...14" rotors and 4-piston Brembos

**Knight** · 09-13-2013, 02:53 PM

Because racecar!

**SuperSSguy** · 09-15-2013, 03:10 PM

Originally Posted by ls1camino

Jump box on the fuel pump and jumping the starter relay with a wire (VATS won't let it start). I'm going to install a push button start switch and not have to worry about the VATS anymore.

Great Job Very Impressive...sick exhaust note!!!

Originally Posted by tatertot91

Used an Eastwood fender roller and it worked great on mine as well

Do you have to cut then roll?????

**SuperSSguy** · 09-15-2013, 03:12 PM

Originally Posted by ls1camino

Jump box on the fuel pump and jumping the starter relay with a wire (VATS won't let it start). I'm going to install a push button start switch and not have to worry about the VATS anymore.

Originally Posted by ls1camino

Finished the CTS-V front brake upgrade...14" rotors and 4-piston Brembos