What did you do with your Trans Am today?

[SMWS6TA]

Lowered the car with BMR lowering springs, KYB Struts, Founders LCA's Relo Brackets, ADJ PHB and SFC's. I have 18x9.5 tires on the rear. Just catches the outside lip of the fender when going over dips in the road or going over bridges that aren't smooth at high speeds. Around town driving and cruising isn't an issue.

- - - Updated - - -



I thought that was a no brainer. However, I am not curious. What would happen if you didn't? I should have taken a picture of it on the fork lift! That was kinda cool.

Binding, road noise/vibration and even crack welds

[pajeff02]

Brought her home from Dad's garage for good, No hood( painter ), no inspection, no tags, new LS7 clutch on the bench, slave, Tick mc, sequential tail light kit, and NO Time

Too bad you don't live closer -- we'd have that all taken care of in no time.

[silverWS6]

This.

[Knight]

This.

That's the wrong way to grease the fittings.....

[SuperSSguy]

I have "chrome" graphics on my bird, to include the hood. They look sharp as hell and really does stand out








BUT..........







Some issues to bring up.

"Chrome" graphics seem to last 1 yr, 2 if you're real lucky. After that they begin to fade, even flake off, but leave the sticky paper. PITA to clean off.
Clay Bar and waxing you have to be careful, need to do by hand, otherwise if you use a buffer it will take them off.


"Stainless Steel" - These last longer, suppose to be 5-7 yrs, still look good on Black & NMB cars, others, not so much. Same precautions for clay bar & waxing.



What ever theme you decide make sure it works, otherwise you're wasting money.

........IF i had a bird to do- a T/A id go for air brushing i know its alot more money but would look too cool...just my 2-cents..

[SuperSSguy]

Installed a Hurt pistol grip shifter in my A4 TA with the MBA shift adapter (both bought from WS6store)

Came out GREAT! Looks and feels amazing

Before ordering I had called WS6store and I spoke with Mike who is the owner to make sure it would work with the pistol grip, he was really cool and helpful and assured me he would ship the same day
Ordered it on monday and received it wednesday!

SSHHWEEET !!!!

[pajeff02]

That's the wrong way to grease the fittings.....

I think Edgar may be greasing something else with those hands!

[ls1camino]

This.

And that's why I wear gloves.

[KMdef9]

Out of storage and fully insured. I'm always amazed, after sitting for 3 months with no starting, a little jump from the pack and she turns over in 2 cranks.

I almost forgot how the loud these damn doors are.

[SMWS6TA]

Wife is going to beat my ass when she get's home.

Just ordered Tick Performance Street Heat Stage 3 POLLUTER Camshaft for LS2 Engines 239/244 | .62x”/.59x” | LSA112

and BTR valve springs....

[silverWS6]

Alternator done and fresh oil is in

[bhunter0830]

Washed it

[ls1camino]

Wife is going to beat my ass when she get's home.

Just ordered Tick Performance Street Heat Stage 3 POLLUTER Camshaft for LS2 Engines 239/244 | .62x”/.59x” | LSA112

and BTR valve springs....

[wicked1]

Im no expert on wheels but the only thing I can think of is maybe its the wrong backspace. Making the tires stick out too far. My 315's don't rub at all.

Both sides rub. Not much but enough to hear it. The rear end is centered and double checked by my buddy at the alignment shop.

[bhunter0830]

Binding, road noise/vibration and even crack welds

Well I am glad I did it the right way then!

[bhunter0830]

Im no expert on wheels but the only thing I can think of is maybe its the wrong backspace. Making the tires stick out too far. My 315's don't rub at all.

I'll have to look tomorrow to find the offsets and spacing on them. They don't rub too horribly. Enough to catch the very inside edge of the fender. I just got the Jeep bump stops, so that should hopefully prevent then amount of travel causing the rubbing. If not, we'll move on to the rolling of the fenders.

[Nutball]

Washed it

Ben, I would love to get these 2 together one day. Other then yours, I have only seen one with our color. And it wasn't even a T/A, WS6 or Formula.

[bhunter0830]

Ben, I would love to get these 2 together one day. Other then yours, I have only seen one with our color. And it wasn't even a T/A, WS6 or Formula.

That would be great. I don't travel down to Indiana nearly as much as I used to, however I make a couple trips to Chicago a few times a year for work. If it's nice I'll drive, it's crappy I fly.

There's a guy that lives about 30 minutes south of me that has a 2002 MRM WS6 but he never drives it... EVER... I don't quite understand the concept of that, but to each their own. He bumped into me at a show last year and was picking out the flaws on mine, I had to kindly remind him that I was here and his car was in a barn under a cover collecting dust.

[SMWS6TA]

That would be great. I don't travel down to Indiana nearly as much as I used to, however I make a couple trips to Chicago a few times a year for work. If it's nice I'll drive, it's crappy I fly.

There's a guy that lives about 30 minutes south of me that has a 2002 MRM WS6 but he never drives it... EVER... I don't quite understand the concept of that, but to each their own. He bumped into me at a show last year and was picking out the flaws on mine, I had to kindly remind him that I was here and his car was in a barn under a cover collecting dust.

Hate that when ppl do that shit, never bring a ride but can nitpick the hell out others. I told one to put up or shut up & , I won 2nd place in that show for modified 90's category 0ut of 15 cars.


I had a 96 FB this color and have regretted selling it. My favorite color, I hate the orange red color. If I ever get another Trans Am it will be this color.

[freaky57fast]

Is he just a collector? Hmmm what a jackass that mrm is very killer though wouldn't mind owning a ws6 with Mrm.... maybe next car..