My COMPLETE LED changeover in PICS !

[sjsingle1]

had to cut it and splice it in......very easy.......when I get the second one in there ( ordered 2 but 1 was DOA ) I will post assembly pics

[Sommer86@6LE]

Good stuff! I saw you used my write up for the HP6's. Nice. Great LED's, huh?

I'm also looking forward to your write up on the dome light flat panel.

[SMWS6TA]

Add the part numbers and where you got them just in case Photobucket craps the pics.


Otherwise someone sticky this thread!!!!!!

[sjsingle1]

Good stuff! I saw you used my write up for the HP6's. Nice. Great LED's, huh?

I'm also looking forward to your write up on the dome light flat panel.

i was going to use them ...but ended up not using them......the ones i finally went with i think were a better choice

[sjsingle1]

and i am not happy with the LED in the headlight switch........gunna try something else

[silverWS6]

The gauges look awesome!!

[sjsingle1]

they are sooo freakin bright.......i need shades

another flat panel LED is in the mail........will finish that write up soon

[sjsingle1]

here is the one flat panel held in with gorilla tape

[sjsingle1]

new panel fixin to go in

- - - Updated - - -



2 panels in

[sjsingle1]

stock wire connected with posi locks.......i LOVE those things

- - - Updated - - -



all done........BRIGHT !!!!!!!!!!

[jonnyman]

did the change require any ballasts or resistors to work properly??

[sjsingle1]

the resistors are included on the flat panel board........can you see them? ..........so they are plug n play

[jonnyman]

yes i can, what i really was interested was the tailights, marker lights in regards to that question. the car looks great! I have been wanting to do that for a long time

[sjsingle1]

all the LEDs shown have the resistors in the assemblies......if you were to use bare LED bulbs resistors would be necessary

[jonnyman]

thank you, Great work!

[sjsingle1]

and dont forget the 3rd light.......the stock bulbs were melting the sockets......use a red LED in there..........NOT WHITE

[jonnyman]

thanks good looking out!

[El Toro Loco]

subscribed

- - - Updated - - -

subscribed

[Too Fast]

Looks great. Just found this thread. How bright are the taillights? I've seen a lot of LED retrofits where there is almost no brightness change between the brakes vs tailamps, almost the only way to tell the brake lights came on is bc the third eye comes on. I've seen that on the front DRLs also, and usually the LEDs are dimmer than the OE DRL. That's not the case with your LEDs? I wonder how tolerant the front ones are to water.

[jiveass]

how much would you say you spent on this conversion?