Results 1 to 2 of 2
-
05-08-2006, 04:40 PM #1
- Join Date
- May 2006
- Location
- FLORIDA
- Posts
- 1
RED- 1995 CHEVY CAMARO Z28
1995 Z28 Ignition\electrical problem
Car has been running fine , had my ignition switch burn out so i replaced it.
after cranking the car runs with a noticeable miss, seems to run ok at idle but will hesitate ( best way to describe it ) like a plug is only firing every other rotation...does not back fire but when i feed the rpms the miss is very noticeable...note.....has everything new from distributor , plugs, wires..just cant understand how burnin up a ignition switch would result in this.anyway i appreciate what ever help you have to offer...
appreciate the site very much
Roadnut in south florida
-
05-15-2006, 02:46 PM #2
The ignition switch wouldn't effect that. There is so much that could be wrong though. I know you said you have all new ignition stuff, but it might be worth double checking, plug wires burn real fast if they touch a header. It might be as simple as a plug wire popping of a plug or a coil. Also there could be something wrong with an injector, etc. Good luck.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
electrical problem??SOS
By okay469 in forum GTOReplies: 24Last Post: 07-29-2010, 06:51 PM -
electrical problem
By sqznfeathers in forum General HelpReplies: 6Last Post: 05-01-2008, 12:57 PM -
Help: odd electrical problem
By rapter34 in forum Stereo and ElectronicsReplies: 1Last Post: 04-06-2008, 05:59 PM -
Electrical/charging problem problem
By jchcomputers in forum General HelpReplies: 4Last Post: 02-23-2007, 05:59 AM -
Electrical wiring diagram for LS2 ignition coils?
By TeamX in forum General HelpReplies: 0Last Post: 05-04-2006, 01:02 AM
Bookmarks