Post up your F-Bodies with Corvette wheels!!

**Durango** · 12-20-2011, 06:44 PM

Originally Posted by fbodyNATION

are those deep dish? i like how they(rims) dont sit too far in or too far out,i do want a wider tire in the rear but not too wide what would you suggest?

You must have spacers on the rear of that?

**cancam99ss** · 12-21-2011, 07:53 AM

Originally Posted by Zeppelin

Welcome to the Z06 T/A club.

These wheels look absolutely amazing in fbodys

**Rhyan17** · 12-21-2011, 10:55 AM

Originally Posted by TDuBB

2000 Trans am, 27k Miles currently.

Rims are Z06 Spyder. 19x10 with 285/35/19 and 19x12 with 325/30/19

Front Z06 Brakes

that car looks evil

**blackSS01** · 12-27-2011, 11:57 PM

Originally Posted by Zeppelin

Welcome to the Z06 T/A club.

**Smittro** · 12-28-2011, 07:41 AM

Originally Posted by Zeppelin

Welcome to the Z06 T/A club.

Those wheels make that car look amazing!

I also like the H3 in the background...

**Ws66** · 12-28-2011, 11:20 AM

**Zeppelin** · 12-29-2011, 01:20 AM

Originally Posted by Smittro

Those wheels make that car look amazing!

I also like the H3 in the background...

Gotta have a tow vehicle in the mix, right?

Thanks for the compliments on the wheels. With the Z06 brakes, they really make the car look different. Currently prepping a Formula hatch for installation of a Mecham wing to finish off the look I am after.

**cancam99ss** · 12-29-2011, 05:30 AM

Originally Posted by Zeppelin

Gotta have a tow vehicle in the mix, right?

Thanks for the compliments on the wheels. With the Z06 brakes, they really make the car look different. Currently prepping a Formula hatch for installation of a Mecham wing to finish off the look I am after.

How hard was the z06 install and what body c5 or c6

**Smittro** · 12-29-2011, 06:05 AM

Originally Posted by Zeppelin

Gotta have a tow vehicle in the mix, right?

Thanks for the compliments on the wheels. With the Z06 brakes, they really make the car look different. Currently prepping a Formula hatch for installation of a Mecham wing to finish off the look I am after.

Yes Sir!

**Zeppelin** · 12-30-2011, 01:26 PM

Originally Posted by cancam99ss

How hard was the z06 install and what body c5 or c6

C6. Install wasn't that bad, just not at all cheap. Cut the caliper mounts off the spindles and add the custom mounts. Calipers bolt right on.

**cancam99ss** · 12-30-2011, 02:23 PM

Originally Posted by Zeppelin

C6. Install wasn't that bad, just not at all cheap. Cut the caliper mounts off the spindles and add the custom mounts. Calipers bolt right on.

Do they sell those custom mounts

And how much did it run you

**Zeppelin** · 12-31-2011, 04:26 AM

Originally Posted by cancam99ss

Do they sell those custom mounts

And how much did it run you

They do. If I recall, they were called track brackets, or something similar. I think it was somewhere between a grand and 1500 to do the swap.

Probably best to keep any other questions to PM. I didn't mean to take the thread off track.

**blackSS01** · 01-08-2012, 12:48 PM

Big Hammer has a great write up about the C6Z brake converstion. Just search for it and you should find it. I can't wait to get my wheels on instead of looking at them. Damn expenses coming left and right prevent me

EDIT: It was Wesman! Here is the link that will help.

http://www.ls1.com/forums/f66/cts-v-...w-pics-115446/