****4th of July TRAIN****

[bluehawk2000]

The reason you dont get passed is that a Mustang sits slightly higher and they can see down your shirt. Thats the only reasonthey dont pass you. lol



Beer + Whiskey + naked chicks = good times

The condition is post/pre-op are not permitted in to the equation.

It is mandatory to have those three added together to make a perfect equation haahahahahaha lmao..

[GTP231]

Working in a shop where there isn't much A/C really has put a damper on this summer. But that will change.

Funnny how being a real tech changes the out look of this bull shit heat and humidity
<- Works in an air conditioned shop

[bluehawk2000]

Funnny how being a real tech changes the out look of this bull shit heat and humidity
<- Works in an air conditioned shop

<- works in a heated humid shop during the summer, and a cooled and iceberg shop during the winter haha!!

[GTP231]

What happened to supreme blackss?

[GTP231]

<- works in a heated humid shop during the summer, and a cooled and iceberg shop during the winter haha!!

Been there know the pain

[bluehawk2000]

What happened to supreme blackss?

I have no idea man I haven't been on here in multiple months!!

[Mr. Luos]

Finally got around to painting the 'chrome' brake vents on the TBSS. Waiting for the clear to dry now.
Heading to Breckenridge with Sara on Sunday for 3 nights of nothing.....CANNOT WAIT!


What the hell everyone been up too?

[GTP231]

Frying in a black car with no a/c

[35th-ANV-SS]

How is that car coming 35th I seen you write up on the ss bro, hope it's running well for a garage queen and a light foot that you are hahah lmfao.

Car has been back on the road about 3 weeks now, give or take. It sounds SICK. The bypass valve is ridiculously loud though. My little brother heard it from about 4 blocks away when I came to pick him up a few weeks ago.

Sadly, nobody wants to even rev at me anymore.

[Mr. Luos]

Frying in a black car with no a/c

Somehow the Grand Ma's AC still works great.
Took it up to Breckenridge Monday.....got 30MPG with the AC on.

And didn't even overheat.
Did roll 138K.....

[TLS_Addict]

Frying in a black car with no a/c

Hrm....my AC works almost as good as my 4L60-E! Hahahahhahhahah

Quick questionf or you. I know that the early 4L60E transmissions found in the V6 cars have a different bell housing than the detachable LS1 cars (as opposed to a 1 piece unit) but did they still use that one piece design with the V6s found from 98-up or do they get a detachable bell housing? Or am I way off base with this one? Its late remember and I have been reading Great Expectations along with spending a long time trying to download porn. Connection isnt well tonight.

Car has been back on the road about 3 weeks now, give or take. It sounds SICK. The bypass valve is ridiculously loud though. My little brother heard it from about 4 blocks away when I came to pick him up a few weeks ago.

Sadly, nobody wants to even rev at me anymore.

For some reason I am having a VERY HARD time feeling sorry for you and your loud car....lol

[bluehawk2000]

Car has been back on the road about 3 weeks now, give or take. It sounds SICK. The bypass valve is ridiculously loud though. My little brother heard it from about 4 blocks away when I came to pick him up a few weeks ago.

Sadly, nobody wants to even rev at me anymore.

Lol, I need to see a video of this crazy car haha!! And I have somebody in mind that would give you a run for you money lol naturally aspirated 383 stroker...

[35th-ANV-SS]

I don't think I could be putting the power down to the ground any more effectively. My car literally dead hooks shifting into 2nd and 3rd at WOT. I don't even get a bark from the tires.

There is a short video of it in my thread. It is of when the car first got running again with the SC installed, prior to the injectors and tune being made. That video gives the car absolutely no justice though.

[35th-ANV-SS]

BTW - just turned 22,000 miles on the garage queen the other day. Not so much a garage queen anymore. I've put 16K miles on it over the last couple years

[cammed goat]

Funnny how being a real tech changes the out look of this bull shit heat and humidity
<- Works in an air conditioned shop

There are times when all us techs will sit in the air conditioned office to cool off. We had a two hour dead spot today so while everyone was in the office, I stayed in the shop messing with a brake caliper from an old Lexus RX300. Bleeder screw snapped so I tried drilling the rest out as suggested by one of the writers. Everyone looked at me like I was insane being in the shop.

[bluehawk2000]

I don't think I could be putting the power down to the ground any more effectively. My car literally dead hooks shifting into 2nd and 3rd at WOT. I don't even get a bark from the tires.

There is a short video of it in my thread. It is of when the car first got running again with the SC installed, prior to the injectors and tune being made. That video gives the car absolutely no justice though.

Are you running stock rims? and if so what kind of tires are you running? And I will wait for a better video to watch to get better justice out of it haha. and your car has 22k on it mine has 115k on it now time for a complete swap with a forced induction set up..

[35th-ANV-SS]

Stock rims. Nitto 555R DR's. 275 50R17's.

I have a bit of money in the suspension which is a big part of why I'm hooking as hard as I am.

[GTP231]

Hrm....my AC works almost as good as my 4L60-E! Hahahahhahhahah
Quick questionf or you. I know that the early 4L60E transmissions found in the V6 cars have a different bell housing than the detachable LS1 cars (as opposed to a 1 piece unit) but did they still use that one piece design with the V6s found from 98-up or do they get a detachable bell housing? Or am I way off base with this one? Its late remember and I have been reading Great Expectations along with spending a long time trying to download porn. Connection isnt well tonight.

I'll have to look into it. Can't remember off the top of my head since it's been quite awhile since I've looked at one

[Mr. Luos]

Stock rims. Nitto 555R DR's. 275 50R17's.

I have a bit of money in the suspension which is a big part of why I'm hooking as hard as I am.

But can you hook up a 1st gear roll from 30MPH????

No idea how....but mine did.

[35th-ANV-SS]

If I stomp on it from a 3K RPM in 1st it just goes. I hate doing it in 1st though. The damn tach hits redline almost instantly it seems

You definitely have to be quick on the shifts.