Results 1 to 5 of 5
-
05-01-2006, 07:47 PM #1
- Join Date
- Mar 2006
- Location
- Regina, Sask Canada
- Posts
- 84
Black- 2000 Camaro SS
Where to Hookup BOV for STS Turbo
Hello,
I was wondering if anyone had any input on where i am to hookup my BOV vacumme line on my LS1 engine.
what is the best place.
Thanks
-
05-01-2006, 09:01 PM #2
Although I have an STS, my auto does not require a BOV. However, I have heard that the best place is to put a "t" in the brake booster line and connect it there.
-
05-02-2006, 08:09 PM #3
- Join Date
- Mar 2006
- Location
- Regina, Sask Canada
- Posts
- 84
Black- 2000 Camaro SS
well i hooked it up to the brake booster tonite as well as finished the boost gauge install. other than that im basicly done my kit install.
took some time
basicly 16 hours. had lots of problems durring the install but other than that as soon as the exhaust shop is done raising the exhaust pipe to the turbo then i will be out ripping up the street.
it sounds very sweet.
-
05-29-2006, 12:54 PM #4
- Join Date
- Feb 2006
- Age
- 42
- Posts
- 24
You can tap a port off of the intake manifold and run a vacuum line to the BOV so that it gets its own signal
-
06-03-2006, 12:38 AM #5
- Join Date
- Feb 2006
- Location
- Williamsburg, Virginia
- Age
- 52
- Posts
- 11
White- 2002 Camaro Z28
I tapped the vacuum line exiting the driver side of the throttle body. Works fine.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
I need a hookup - .dwg to .pdf
By pecha in forum Almost Anything GoesReplies: 6Last Post: 01-30-2008, 07:33 PM -
Looking for the hookup!!
By odarabla in forum General HelpReplies: 7Last Post: 09-01-2007, 05:21 PM -
AUX hookup
By sstud in forum Stereo and ElectronicsReplies: 1Last Post: 05-13-2007, 02:12 PM -
iPod Hookup
By lonemtnman in forum GTOReplies: 6Last Post: 03-02-2007, 06:03 PM -
A/f Guage Hookup
By vipVEGAS in forum Computer & TuningReplies: 9Last Post: 08-17-2006, 03:51 AM
Bookmarks