Results 1 to 20 of 24
Thread: Another shout out to FROST.
-
03-26-2011, 08:24 AM #1
Another shout out to FROST.
Got the car back last night and after letting it run for a few minutes in park I took it for a ride and the thing didnt miss a beat! I was a little scared of how it first ran when I swapped the old PCM for the tuned one but honestly within a few miles the car felt perfect. Not sure if it is still learning but I plan to just take it easy for a few hundred miles to make sure it "learns" everything and I dont hurt something by hammering on it prematurely.
The car shifts firm under normal driving and reminds me of when I had a shift kit in my other Camaro.
So far I could not be happier. Strongly would I recommend FROST and his services to anyone. With the tune from him and the 3.73s I cant wait to see the difference at teh track and on the street.
-
03-26-2011, 08:28 AM #2
Frost does a real nice job with his mail order tunes. We are also very fortunate to have him on here helping out with tuning questions.
-
03-26-2011, 08:36 AM #3
+1, he was great with any questions I had for him. Very good guy to deal with and will surely use him again. I would actually like to head down to his shop someday and perhaps have an actual "dyno tune" done by him.
I see he is going to offer tuning for Dodge/Chrysler products int he future. Perhaps the Jeep could use a boost in power! lol
-
03-26-2011, 08:40 AM #4
If I ever go the H/C/I route on our car that is where it will go for its tune.
-
03-26-2011, 08:52 AM #5
Absolutely. Whats nice is you could do the install at your place, do the over the internet tuning to get it close, then drive down and have the final touches done on it.
I wish there was a dyno place around JUST to see how well our cars do at the track and how well they take advantage of the power they make.
-
03-26-2011, 08:56 AM #6
No driving required. Ordered the trailer last week.
-
03-26-2011, 09:01 AM #7
I knew you were looking for one. Glad you were able to find something that fit your needs.
Lunch this week on me.
-
03-26-2011, 09:21 AM #8
-
03-26-2011, 10:16 AM #9
Frost will be tuning my car in person come the end of May/beginning of June. Looking forward to meeting the tuning guru.
-
03-27-2011, 08:24 AM #10
-
03-27-2011, 09:43 AM #11
-
03-29-2011, 07:47 AM #12
Hey guys,
Sorry for the slow posting... last few weeks have been absolutely JAMMED! Thanks for the nice words and always let me know if there is anything that I can help with.
-
03-29-2011, 02:39 PM #13
If I ever need any further tuning I will be giving you a call.
Sometime I want to hit a dyno........somehwere! Jeff, I think there is a dyno day up in Rochester. A kid in my class has been a few times. Would you be interested in going up there with you T/A?
-
03-29-2011, 02:45 PM #14
If it's an auto, you need a scanner to hold the gear and to lock the stall on the rollers.
-
03-29-2011, 03:45 PM #15
Good to know! Thanks man.
I just want Jeff there for comparison. His car has the better intake, revised cam, better exhaust, most likely a little better tune (from you ), and will have a better tranny and stall as well. Not saying that I care JUSt about numbers, just want to see how I compare to a fellow member with similar modifications. Though I am inferior! UGH!
-
03-29-2011, 07:22 PM #16
Chassis dyno is on my list of "wants" for the next garage. I really like the Land and Sea setup that Redline Performance has in their shop.
-
03-29-2011, 08:15 PM #17
-
04-13-2011, 04:57 AM #18
- Join Date
- Nov 2010
- Location
- The Woodlands,Texas...N.O.
- Posts
- 1,016
Pewter Metallic- 2000 Pontiac Trans Am WS6
I will be getting a mail order tune from Frost also thats after I get my headers & delete my egr after hearing so much positive feedback from members on this site about Frost Im looking foward to doing buisness with him in the future
-
04-21-2011, 06:51 PM #19
Frost continues to impress
He did a great job on my car. Fired up and idled perfect and drives great. Tuned for the new stall and mods in sig. Couldn't be happier. Fast service
2000 WS6 A4,Pacesetter LT,TSP catted Y, Magnaflow Catback, LS6 intake,Diablosport, Strano springs, Koni 4/3, UMI Adj Panhard, UMI LCA, Poly Motor and Tran mounts, Circle D 3B 3500 stall, Tuned by Frost
-
04-23-2011, 06:29 AM #20
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Shout out from Central PA
By 428 78T/A in forum New Member IntroductionsReplies: 10Last Post: 05-27-2012, 10:38 AM -
Shout out from New Hampshire
By sscavy in forum New Member IntroductionsReplies: 4Last Post: 01-10-2008, 07:21 PM -
Shout out from Hunsville AL
By 1st5.7gto in forum New Member IntroductionsReplies: 12Last Post: 01-02-2008, 08:34 AM -
shout out to anyone in mass
By 04goatinmass in forum Eastern MembersReplies: 6Last Post: 02-13-2006, 04:06 PM
Bookmarks