Results 1 to 20 of 50
Thread: Autotrix window fix in pics
-
03-07-2011, 07:09 PM #1
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
Autotrix window fix in pics
Got the autotrix express down fix along with a new window motor.....and while I was at it finally fixed that damm crack in the door panel.....its not to hard and might take you a few hrs ......I took over a month to do mine......put this kit and a new window motor on your must have list
Last edited by sjsingle1; 03-07-2011 at 07:49 PM.
-
03-07-2011, 07:09 PM #2
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
step 1.......run a wire from the bat lug on the drivers side.....notice the kit provides a fuse for the wire.......its that black thing in the middle.......water resistantLast edited by sjsingle1; 03-07-2011 at 07:48 PM.
-
03-07-2011, 07:10 PM #3
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
I ran the wire from the bat lug along the frontLast edited by sjsingle1; 03-07-2011 at 07:23 PM.
-
03-07-2011, 07:10 PM #4
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
I then came up and around the battery with that wireLast edited by sjsingle1; 03-07-2011 at 07:24 PM.
-
03-07-2011, 07:11 PM #5
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
I ran the ground wire provided at the stock attaching pointLast edited by sjsingle1; 03-07-2011 at 07:24 PM.
-
03-07-2011, 07:12 PM #6
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
here is the fun part......running the wires into the cabin......I first loosened the computer thinking I had enough room to reach through there......but ended taking it out for more roomLast edited by sjsingle1; 03-07-2011 at 07:26 PM.
-
03-07-2011, 07:12 PM #7
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
computer out of the way you can see the gromment you need to go thru to get into the cabin.....I ended up making a slit in it to get the wire thruLast edited by sjsingle1; 03-07-2011 at 07:27 PM.
-
03-07-2011, 07:16 PM #8
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
thats a big gob of electronics in thereLast edited by sjsingle1; 03-07-2011 at 07:41 PM.
-
03-07-2011, 07:16 PM #9
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
-
03-07-2011, 07:17 PM #10
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
set it on the pass floorboard while i ran the wires into the doorLast edited by sjsingle1; 03-07-2011 at 07:28 PM.
-
03-07-2011, 07:18 PM #11
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
running wires thru the door rubber tube.....i trimmed the plastic piece that protects the wires going to the door to accommodate the extra wiresLast edited by sjsingle1; 03-07-2011 at 07:30 PM.
-
03-07-2011, 07:18 PM #12
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
look ma........new motor.....put loctite on them screwsLast edited by sjsingle1; 03-07-2011 at 07:30 PM.
-
03-07-2011, 07:18 PM #13
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
wires in the rubber door tubeLast edited by sjsingle1; 03-07-2011 at 07:31 PM.
-
03-07-2011, 07:19 PM #14
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
i used 3M wire connectors with heat shrink ends instead of the connectors that came with the kit.......these are the wires that go to the block for the window switchLast edited by sjsingle1; 03-07-2011 at 07:32 PM.
-
03-07-2011, 07:19 PM #15
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
if you follow the directions......you make all the connections by the window switch......i felt that made for a very crowded space........so i took the wires that go to the window motor and removed them from the harness til they reached the opening in the door..........then looped them around in the space in the door......it avoided a big jumbled mess of wires and connectors that would have been at odd anglesLast edited by sjsingle1; 03-07-2011 at 07:36 PM.
-
03-07-2011, 07:20 PM #16
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
looking goodLast edited by sjsingle1; 03-07-2011 at 07:36 PM.
-
03-07-2011, 07:20 PM #17
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
i shoved the gob of electronics in the cornerLast edited by sjsingle1; 03-07-2011 at 07:37 PM.
-
03-07-2011, 07:21 PM #18
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
patched the crack in the door panel with 3M bumper glue.....added a piece of screen mesh for reinforcementLast edited by sjsingle1; 03-07-2011 at 07:45 PM.
-
03-07-2011, 07:21 PM #19
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
best i could get itLast edited by sjsingle1; 03-07-2011 at 07:39 PM.
-
03-07-2011, 07:21 PM #20
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
all done.......its a beast of up and down bliss.......and the express down feature is handy tooLast edited by sjsingle1; 03-07-2011 at 07:39 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
autotrix passenger window fix
By WS6S in forum Parts ReviewReplies: 17Last Post: 03-02-2016, 12:40 PM -
Autotrix F-body Window Fix
By autotrix in forum Parts For Sale / TradeReplies: 13Last Post: 01-13-2010, 04:38 AM -
Request: pics of your ws6 window sticker.
By MistrCreazil in forum Firebird / WS6Replies: 18Last Post: 10-02-2009, 05:40 AM -
looking for pics of black ext w/ 35% window tint
By 1MileCrash in forum Appearance SectionReplies: 15Last Post: 08-03-2008, 08:17 AM -
autotrix driver window kit help?
By larryndog in forum General HelpReplies: 2Last Post: 04-26-2008, 06:03 AM
Bookmarks