Supercharger LS1

[MC02SSSLP]

I am a newbie to ls1. I have a 2002 Camaro SS SLP Convertable. It has a LS1. I am interested in installing the magnuson supercharger kit with rear pulley setup for front mass air connection. It dosnt seem to show for my car. It shows for the GTO and the 02 Corvette Z06 which is an LS1. Is it the same model / motor? Will it fit?
I am also looking for some input on the right combination Heads, Roller Cam, Roller Lifters and Roller Rockers parts with the supercharger with the most boost for the maximum hp HP with regular 93 Octane gas. Keeping the stock pistons and bottom end!

Lets hear it Thanks!

[youngrigo]

The front accessaries are different between those cars and the camaro so it may not work. and im sure the plumbing is different as well

[bills98ta]

Our engine's sits back under the cowl / dashboard... There's no room for that style...

[MC02SSSLP]

Thanks guys! I really dont like procharger. But I know what you mean about the motor sitting back under the firewall. I will look into what my options are. Maybe with a little fabrication. I thought I read that it was just some cutting within the cowl hood would do it. IDK!! If you come up with anything, let me know

[justinmc978]

Our engine's sits back under the cowl / dashboard... There's no room for that style...

need to get a centrifugal supercharger, not a roots type.

[youngrigo]

Why dont you like the procharger setups?

[MC02SSSLP]

I like the whole setup kit, injectors and all. Bolt on and program chip. Good to go. No cooling issues. Just prefer them I guess. IDK! Sell me on centrifugal.

[TA98]

prochargers are very easy to install. ive never done one an LS1 but i put one on a 03 Mustang GT and it took about 5 hours from start to finish.

[35th-ANV-SS]

Countless people running the Procharger and no issues. Just keep the boost at around 8-9psi and make sure you have a damn good tune and you won't have any issues if you don't plan on forging the internals.

If you are worried about heat, you can run a front mount intercooler over the twin intercoolers and even run meth. There are always options on keeping down the IAT's.

[bluehawk2000]

This is one of our members on here, who has the procharger set up check out his vids!!

http://ls1.com/forums/showthread.php?t=150374

[MC02SSSLP]

I found that Dragon makes the M1000 that fits all F-bodies. Anybody got any experience with those. Thet are mainly used on the Corvette.

[Packy]

I found that Dragon makes the M1000 that fits all F-bodies. Anybody got any experience with those. Thet are mainly used on the Corvette.

LOL! Go ahead and look for some results on that set-up. You will find that there is slim to none real world experience with it. I called the company to ask them about it but they were not very user friendly. Hence the reason why no one will drop the cash on it. Then the F-Body with it installed on their website has no video or real time data/proof anywhere to evaluate it on your own. I highly doubt you can buy it and get it to work correctly for an F-body. If it were as easy as they say and produced some great results then lots more would have done it. Until then I will stay with my Procharger.

[blackSS01]

My buddy has this setup and it runs great. Very little fab work needed. Think he is making 600rwhp with not alot of boost. Rode in it and it was INSANE!!!

[MC02SSSLP]

Thank you! Finally! It looks like the Magna Charger. Is it? Can you give me specifics on your setup? I also found the Dragon Whipple 3.3 and the Eaton 112 Magnuson which comes with all accesories. What is your take on these also. Why did you choose?

[Frost]

My take on it is that while all of the PD blower guys are sitting at the line spinning tires, the Procharged and turbo charged cars will be getting down the road... and those aren't setups that you can just chase down once they are out.

[SnIpEr]

Go procharger man! Most widely used SC on FBodies and it produces great results and the sound is orgasmic! Why wouldnt you want it? I cant wait to get mine later this year

[1-silver-bata]

BlackSS01 posted photos of my car. The setup is a Harrop supercharger. I put a link of my car making a dyno run at Late Model Speed. Just so you know my experience with Late Model Speed was awful. They have since been run out of business. The car was running 581rwhp/603rwtq on 9lb of boost. I have turned down the boost to 7lb and she is running 513rwhp at 5500rpm and 550rwtq at 3000rpm. I also put the link that made me go with root style blower. You can’t hear mine until around 3500rpm. The Prochargers make a lot of noise at idle in my opinion. I couldn’t be happier with the setup.



http://www.youtube.com/user/dtiffany...18/7cyrWJ5B6Oc

[jetaws6]

Prochargers are nasty man I was the same way you were until I did a little research and now I have completely changed my mind and want a procharger bad

[blackSS01]

BlackSS01 posted photos of my car. The setup is a Harrop supercharger. I put a link of my car making a dyno run at Late Model Speed. Just so you know my experience with Late Model Speed was awful. They have since been run out of business. The car was running 581rwhp/603rwtq on 9lb of boost. I have turned down the boost to 7lb and she is running 513rwhp at 5500rpm and 550rwtq at 3000rpm. I also put the link that made me go with root style blower. You can’t hear mine until around 3500rpm. The Prochargers make a lot of noise at idle in my opinion. I couldn’t be happier with the setup.



http://www.youtube.com/user/dtiffany...18/7cyrWJ5B6Oc

Nice to see you joined the board
Your car runs nuts! I want a Maggie, love the whine

[youngrigo]

There is a reason most go Procharger....

With that being said, I love the TQ of the roots sytle blowers but the top end of a procharged car is hard to beat!