opened the cut-out

[jiveass]

Opened the cut-out for the first time today. Sounds like crap. And for some reason it felt weaker. Is there a certain position in the exhaust system where the cut-out would be most effective?

[02_slp_ss]

do u have anything done to ur car? i have mine under the pasanger seat... i love the way mine sounds at wot an idle

[dennis ss]

It feels weak because you lose a little torque but the top end is stronger. I actually pull off my y-pipe before I go race at the track and I gain about 3 mph consitently. As for the sound its just a matter of what you like. I like it at wot.

[jiveass]

The car is all stock all the way down to the lid. It does have a flowmaster but that's it. I'm in the dark as to why the previous owner would add the cut-out unless he was racing it. Most likely he had some aftermarket parts on it and took it all off before he sold it.

[Blackbird WS6]

It feels weak because you lose a little torque but the top end is stronger.

true dat

when you start getting up there with mods and whatnot and then a tune with them open you will see them work

but all stock you will just gain up top

[dennis ss]

true dat

when you start getting up there with mods and whatnot and then a tune with them open you will see them work

but all stock you will just gain up top

Exactly. So op, keep the cut-out and start modding bro

[02_slp_ss]

Exactly. So op, keep the cut-out and start modding bro

yep put a set of LTs an ory an ull love it at wot..... put a nice cam in it sounds like 24/7

[jiveass]

Exactly. So op, keep the cut-out and start modding bro

First hp mod will be LS6 crate engine. I refuse to mod the LS1 as it has 141k on it. So for now, mainly cosmetic or suspension upgrades will take place.

[robcas47]

You can still bolt on some LT's and ORY. These should still work with the LS6 right? I had a Ecut-out on my 99 Z28 with just an ORY that bolted up to the stock manifolds, it sounded alright but not exactly how I thought it would. My current car has LT's ORY and the same Ecut-out kit on it and it gives me an eargasm at WOT. I havent had it dyno'd since I put on the cout-out but Will find out this spring when I get my cam swap done. FWIW I say keep the cut-out an get LT's at least.

[Blackbird WS6]

You can still bolt on some LT's and ORY. These should still work with the LS6 right? I had a Ecut-out on my 99 Z28 with just an ORY that bolted up to the stock manifolds, it sounded alright but not exactly how I thought it would. My current car has LT's ORY and the same Ecut-out kit on it and it gives me an eargasm at WOT. I havent had it dyno'd since I put on the cout-out but Will find out this spring when I get my cam swap done. FWIW I say keep the cut-out an get LT's at least.

yea they fit both engines, its all the same crap in the end lol

[INMY01TA]

My car sounds fucking awesome with the cutout opened.

[pajeff02]

^^ This. But with a spelling correction.

[INMY01TA]

^^ This. But with a spelling correction.

done