Results 1 to 12 of 12
Thread: upper panhard bar?
-
11-03-2010, 01:21 AM #1
upper panhard bar?
I have been doing springs & struts and I do have a panhard bar but I noticed that there is a bar above the panhard bar that goes from the pass to driver side is there a replacement bar for that? I have been doing all the suspension on my car and was just curious about that? Any help on this? Thanks.... Teknik
-
11-03-2010, 04:54 AM #2
Yes there is. Basically they call it a Panhard relocation kit. It comes with a new bar and bracket. Click the link:
Kentucky Speed
2018 Tahoe - Silver - OEM
2008 Z06 - Velocity Yellow - BBE exhuast - Airaid CAI **sold**
2002 Z06 - Electron Blue Metallic - D1 - E85 - 701 rwhp 687 rwtq **sold**
2002 Z28: M6 NBM - cam and boltons - 396rwhp 357 rwtq **sold**
-
11-03-2010, 06:46 AM #3
-
11-03-2010, 10:23 AM #4
-
11-03-2010, 10:38 AM #5
-
11-03-2010, 10:39 AM #6
When you get the aftermarket relocation phb with lowering springs it will not be parallel to the ground when the car suspension is loaded.
You want the phb to be as parallel to the ground as possible due to the way it works.
There is an additional bracket for the driver's side that you should purchase as well that corrects this problem. They sell it at JEGS.
I believe the aftermarket phb and relocation kits are designed for stock height cars.
-
11-03-2010, 11:10 AM #7
Like 35th said it alters the angle of the pan-hard bar which will actually hurt handling. The only reason to use the relocation kit is to make room for true duals/large exhausts, there is no advantage to running one if your not having exhaust clearance issues. Save your money for other mods IMO.
-
11-03-2010, 04:21 PM #8
-
11-03-2010, 07:35 PM #9
- Join Date
- Jun 2008
- Location
- Rochester, NY Rochesterracing.com
- Posts
- 1,276
- 2000 Camaro B4C
the part # on that jegs relo is 550-41055 if you wanna check it out.
I havent really looked into too much, but do you guys think I should go for it? I have a full umi suspension now2000 B4C Special Service Package Z28 - Kooks 1&7/8 Stepped 2'' - TSP Torquer V.2 - FAST 92/92 - BDR 4000 Conveter - Xtreme Trans Stage II - Full UMI Suspension - Pacesetter LT's - Comp Drag Shocks - Magnaflow - Cutout - ZO6 MAF - FTP LID - Street Tuned -
-
11-04-2010, 07:44 AM #10
hate to thread jack but if someone can tell me real quick what the benefit to adjusting or relocating the panhard bar on our car does. I've read it somewhere and cannot remember what and where i read it. thxz
i thought it was so u can fit bigger size tires than 275 but apparently not
-
11-04-2010, 08:38 AM #11
-
11-04-2010, 10:35 AM #12
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Used LS6 Upper End + Cam, what do I need to consider?
By Naaman in forum External EngineReplies: 12Last Post: 02-11-2011, 08:27 PM -
Question: 3.8 upper manifold
By 99yellowz28 in forum V6Replies: 4Last Post: 11-25-2010, 02:09 PM -
Wanted: 98 upper dash
By Justin23454 in forum Parts Wanted / TradeReplies: 1Last Post: 09-19-2010, 07:39 AM -
BMR K Upper CA
By SScott in forum Parts Wanted / TradeReplies: 0Last Post: 12-17-2007, 03:07 PM -
WTB upper dash pad
By IDOL of AMERICA in forum Parts Wanted / TradeReplies: 0Last Post: 01-07-2006, 06:07 PM
Bookmarks