fuel rail covers

**bpopham22** · 09-11-2010, 12:05 PM

hey can i see some pics of everyones fuel rail covers and where they got them. I would like to order some to help dress up my engine bay.

**pajeff02** · 09-11-2010, 12:19 PM

Our FRC's are compliments of Afterthoughts Auto:

**bpopham22** · 09-11-2010, 12:38 PM

Those look good. How much of a P.I.T.A are they to put on? Ive seen the ones on afterthoughts auto, i was just curious if there are any others out there.

**Y2KPewterSS** · 09-11-2010, 12:43 PM

Afterthoughts as well. Not hard to install either.

**bpopham22** · 09-11-2010, 12:47 PM

oh that reminds me, i have a umi STB, i read that the FRC dont fit with ALL types of STB. Does anyone have a umi STB with the afterthoughts FRC?

**pajeff02** · 09-11-2010, 02:22 PM

Worst part of the installation was peeling the heat tape off the fuel lines and then removing the adhesive residue. I strongly recommend popping the cowl seal clips up with a flathead screwdriver before starting -- they will make you bleed. Just be real careful and take your time and it's a pretty easy install.

**GoldenFlame** · 09-11-2010, 04:03 PM

I used to have Corvette Ones.. Also from Afterthoughts Auto

**bpopham22** · 09-11-2010, 04:28 PM

do they require disconnecting any hoses or lines or is that what the cutouts are for on the covers themselves?

**Y2KPewterSS** · 09-11-2010, 04:42 PM

Originally Posted by bpopham22

do they require disconnecting any hoses or lines or is that what the cutouts are for on the covers themselves?

No need to disconnect, thats why the cutouts are there like you guessed.

**Sommer86@6LE** · 09-16-2010, 08:11 PM

I've got 1 side for sale (pass.). I'm asking $35 for it. Might be cheaper than afterthoughts.

**n08fear** · 09-21-2010, 08:08 AM

Does any one know of a site that might have some pictures of the install process?

**99'CajunFirehawk157** · 09-21-2010, 09:31 AM

Pm for the makers info, hes a member here too.

**lil_Mike** · 09-28-2010, 09:48 PM

**jagfan93** · 09-29-2010, 02:00 PM

Originally Posted by 99'CajunFirehawk157

Pm for the makers info, hes a member here too.

Wow! Gorgeous!

**Homer J** · 09-30-2010, 07:07 AM

Originally Posted by lil_Mike

those are slick. where did you get them? thats the fuel rail cover off a NEW 2010 Camaro, right?

**lil_Mike** · 09-30-2010, 07:16 AM

no those are GTO fuel rail covers and i got them off some guy on LS1tech.

**Homer J** · 09-30-2010, 09:55 AM

Originally Posted by lil_Mike

no those are GTO fuel rail covers and i got them off some guy on LS1tech.

did you have to mod them at all to get them to fit?

on a side note, how do these fuel rail covers attach? (corvette, gto, ect.)

**lil_Mike** · 09-30-2010, 11:11 AM

i had to trim a little on the passenger side because the A/C box. oh and i trimmed for the throttle cables.

i had to cut some holes for my fuel lines on the drivers side.

for the gto ones theres a hook on the top part that connects to the fuel rail and then theres a little clip on the bottom that clips onto a nipple off the coil packs.