TT halted ugh but yay.....

[jiveass]

yo, so what kinda gas milage and driveability can you expect from this thing? and will your stock tranny hold up to it?

[Smittro]

awesome project. great to see a 6 cylinder buildup.

Thanks man!

[Smittro]

yo, so what kinda gas milage and driveability can you expect from this thing? and will your stock tranny hold up to it?

Mpgs not a concern.. Stock I got about 24 highway if I stayed out of it. Prolly be around those numbers since it's a virgin spec engine (no remans) with some rotating goodies added.. May get +/- a little with FI..

No sir can't use my stock trany in any way shape or form.. It would die long before seeing max boost 4t60e is a junk unit from new... Had to have one built (still waiting ), m19 Muncie 4spd.. 4:11 take off.. But it should be in real soon..

I did use my old intake since it was preped already, and I had to pirate one of the rear cam covers off my other motors (cover @ the right or the pic is backwards) to achieve the look..

[Smittro]

On the trany issue I have found over all the research I've done on this particular engine, that it is unwise to put any manual trans next to this engine that is'nt a Muncie..

[jiveass]

On the trany issue I have found over all the research I've done on this particular engine, that it is unwise to put any manual trans next to this engine that is'nt a Muncie..

so what application did the m19 come in?

[Smittro]

TDC 3.4 all stock:
[ame]http://www.youtube.com/watch?v=8Z5_2suyVnc&feature=related[/ame]
TDC 3.4 with exhaust:
[ame]http://www.youtube.com/watch?v=AY16gJEdRGs&feature=related[/ame]
TDC ONE turbine stockish bottom end and custom headers:

[ame]http://www.youtube.com/watch?v=-6jv_s1hUJg&feature=related[/ame]

[Smittro]

so what application did the m19 come in?

4spd v6 "x" code Chevy Citation..

[jiveass]

4spd v6 "x" code Chevy Citation..

haha no shit!! i had an 81ish citation we used for a woods buggy!! ....funny shit.

[Smittro]

haha no shit!! i had an 81ish citation we used for a woods buggy!! ....funny shit.

Yup that be the one Had to send it out for obvious reasons but it's the cases your after when you're building one to be near bullet proof..
Trany can be found beside the carburated 2.8L v6, or the Iron Duke!

[Smittro]

You know the legondary Iron Duke right?
[ame]http://www.youtube.com/watch?v=r_MgzGRc3k4&feature=related[/ame]

[jiveass]

thats basically how the citation was...that sumbitch sat for a few years....put a fresh battery on it and dumped some gas in the carb and it busted right off

[Smittro]

thats basically how the citation was...that sumbitch sat for a few years....put a fresh battery on it and dumped some gas in the carb and it busted right off

them things never seem to die.. Tho the Citation was one of GM's biggest blunders from the 80's..

[Smittro]

[jiveass]

what is this beastly monstrosity and can i fit one on my ride!!!????

[Smittro]

what is this beastly monstrosity and can i fit one on my ride!!!????

That is a solid chunk of airdraft aluminum that is currently being machined into a tunnel ram.. The lower piece is my lower intake b4 paint/machining..

Tube dia. = 4.5in./ ID. 3.5ish..

you could prolly make one for your engine too..

[jiveass]

That is a solid chunk of airdraft aluminum that is currently being machined into a tunnel ram.. The lower piece is my lower intake b4 paint/machining..

Tube dia. = 4.5in./ ID. 3.5ish..

you could prolly make one for your engine too..

ill probly just stick to my stock intake.....looks too complicated for me to tackle.

[Smittro]

[jiveass]

damn that looks expensive

[Smittro]

ill probly just stick to my stock intake.....looks too complicated for me to tackle.

yeah you may need a mill or a machine shop but it could be done in something for an SBC I'm sure..

[Smittro]

damn that looks expensive

Not to bad if you find a good reputable supplier.. Unless you do it yourself, most of the cost will be tied up in machine work..