Best ory to date

[Firebirdjones]

the best ory is a custom built...period ...i am tired of my shitty ory from QTP..granted it has a true merge design...but i can take that merge and have a shop put the arms on it to get better clearance..

IF,,,,you can find a shop with a mandrel bender. I wouldn't be interested in anything with crush bends.

[shady milkman]

IF,,,,you can find a shop with a mandrel bender. I wouldn't be interested in anything with crush bends.

oh i know...i just look dumber than i really am

[Firebirdjones]

oh i know...i just look dumber than i really am

I didn't mean to imply that, you're alright with me Shady.

[Cutlass]

Ohhhhhh...i drink bud

I'm still waiting for the Bud ARH clearance picture...or are you starting to realize the Kooks ORY tucks up better

[02transamce]

there's only one way to solve this. here's a pic of my ground clearance at its lowest point with my Kooks ORY. My ORY has been adjusted so it doesn't bang against the floor at all under any conditions. Stock suspension and tire size

do you have a bump stop? i do and my damn pacesetter y still hits the floorboard a little.

[Cutlass]

nope I don't have that mufflex bumpstop and I don't have any banging issues

[sjsingle1]

you can fix the banging issues with poly MM ya know.........

[basballny2]

I'm still waiting for the Bud ARH clearance picture...or are you starting to realize the Kooks ORY tucks up better

his car is lowered

[Firebirdjones]

do you have a bump stop? i do and my damn pacesetter y still hits the floorboard a little.

you can fix the banging issues with poly MM ya know.........

I don't use either method, I simply repositioned the driver side pipe and welded it back together for about a finger width of floor clearance.

That's all I needed to stop the banging with the stock motor mounts still on the car.

[bberretta]

Here are pics of the LSXtreme Performance Catted-Y (I'll get some installed pics hopefully this weekend and pick up a case of Miller Lite to do the scientific measurement test!):

[Firebirdjones]

I'm liking what I see on the driver side of that Y. They took the time to actually mandrel bend the pipe for floor clearance rather than smash it or do nothing at all like some of the other Y's on the market.

[bberretta]

It is a good looking pipe- clean welds, smooth bends, overall nice so far. I'll post more once I get it in the car and I can give a more complete review of it.

[KING Z28 HAWK]

Here are pics of the LSXtreme Performance Catted-Y (I'll get some installed pics hopefully this weekend and pick up a case of Miller Lite to do the scientific measurement test!):

How much did the catted Y cost you and how did you order it?

[Mumbles]

To the O.P...

My brother and I just replaced the Pacesetter ORY on his 02 SS with a Texas Speed ORY. He has yet to take the car on a Test Drive since doing so (shitty weather mixed with having no time hasn't provided an opportunity yet).

As for for fitment and quality of the TSP Y-pipe, both are top notch. We struggled a little trying to get it pieced together on the car, but that was because of the way we tried to install it. We attempted to build it from the I-pipe of the catback forward to the headers. While I don't think this method would make the installation impossible, it sure as hell made it a bitch to get the pieces lined up.

Once we re-evaluated the situation we decided to loosen the hangers on the Catback and build the ORY off the headers back to the I-pipe. After that, we had the thing together in like 20 minutes.

Clearance between the body and the Y is great. As for ground clearance, I'd have to say its pretty good. Without a doubt, anytime you upgrade from the factory flattened Y-pipe to a full 3" ORY you're going to sacrifice some ground clearance. Its just the trade off you have to expect when you're looking for performance.

The only other Y-pipes I've installed are two sets of Jet Hot Y's. Both installed fairly simple, but they don't have a very good flowing merge, so I wouldn't recommend them.

The LSX Performance Y pictured above looks like a nice piece. The merge looks like it should flow very well and still have plenty of clearance to route through a Chassis Mounted Torque Arm Setup. (Such as the one I have on my Firebird.)

I'm curious the cost and where to get one of these, as well.

[bberretta]

He's just getting off the ground so he's got a deal on them. Can't post links to sellers who aren't sponsors... already been slapped on the wrist for that one.

[Mumbles]

PM sent.

[SSDEUCE]

thanks everyone for the advise all i have to do now is come off the money thinkin tsp or lsx which ever i can get cheaper course i found the pace for 130 free ship so hard to pass up, how cheap to be is the ?

[bberretta]

Pretty much any y is going to flow better than the factory pipe. The questions really are how well does it fit to your headers, how well does it fit to the car, and how well does the merge flow. That's where you start paying- ORY's range from $130 for that Pace to +$400 for the Kooks (on sale at Kentucky Speed) and there is a big difference in the merge and fit between those two. The LSX runs around $200 and the one they normally sell only fits the LSX headers. They make them to fit other headers as well, you just have to ask. I'm going to install mine tomorrow night and Saturday (had to put brakes on the wife's van tonight...) so I'll have a better idea of how they fit after Saturday.

[Firebirdjones]

Any update on fitment???

[bberretta]

Unfortunately I had to leave town before I could finish the friggin' motor mounts- I'll finish the install on Saturday as long as I can get that driver side mount to line up.