*** March Mischief Train... ***

[wheeliE-maxx]

65, raining, and humid as balls here. Supposed to be 77 tomorrow

[cammed goat]

that means one thing... spazpalooza must begin it's formation process...

This. Shall be a nice drive with cut rotors and the 3:73s in.

[Spaz]

This. Shall be a nice drive with cut rotors and the 3:73s in.

[Spaz]

i hope tony can make it this year!!!

[wheeliE-maxx]

This. Shall be a nice drive with cut rotors and the 3:73s in.

What does it come with stock? A bearing exploded in the ten bolt of our old t/a vert so we got it rebuilt with 3.73's. That and a few other bolt ons rendered the 245's out back completely useless

[cammed goat]

i hope tony can make it this year!!!

Shouldn't be a problem pending the boss doesn't bitch. He sent me a msg on fb telling me one of the boss' minions was looking for my profile...which to me is completely since the dude KNOWS I can't stand him.

What does it come with stock? A bearing exploded in the ten bolt of our old t/a vert so we got it rebuilt with 3.73's. That and a few other bolt ons rendered the 245's out back completely useless

Stock is 3:46. The shop owner told me 3:73s are better than the 3:46s and 3:91s as the stock 3:46s suck on mpgs with a modded motor and the 3:91s would render my 1st gear completely useless.

[wheeliE-maxx]

Shop owner is a special lil fella. Torque curve on our car is way stronger than stock right of the bottom. Would handle stock gears fine. 4.10's do make gears short

[cammed goat]

I just hope he can find a gearset. His suppliers don't have the 3:73s in stock.

[wheeliE-maxx]

I would reuse stock if it's in good shape. Why are you doing this anyway?

[wheeliE-maxx]

I just hope he can find a gearset. His suppliers don't have the 3:73s in stock.

My supplier is summit, everything cheaper and nine times or better out of ten it's in stock

[cammed goat]

I would reuse stock if it's in good shape. Why are you doing this anyway?

The diff is whining. The shop owner and his son think it may be a bad carrier or pinion bearing. They suggested the 3:73 ring/pinion upgrade due to the mods under the hood. They told me I would increase my mpgs with teh new gears. And since the diff is gonna be apart anyways...why not?

[cammed goat]

Hey Zapfool...goat sounds nice as hell. To this day I will NEVER understand WHY our factory exhaust was reduced to 2-1/4 after the mufflers. WTF?!

[GTP231]

I am happy I kept my old diff. Shop wants to rebuild it but with 3:73s. One problem...the owner of the shop can't get me an estimate until he can find the gearset.

Don't be a wuss go with 3.91s

[GTP231]

not really... depends on how each one was cared for... that one with 14k could have 10k of burn outs on it...

That ratio sounds close for the GTP

[cammed goat]

Don't be a wuss go with 3.91s

I may have to get them if the 3:73s cannot be located. My MPGs are gonna suck with the 3:91s. I can see it now.

[GTP231]

I may have to get them if the 3:73s cannot be located. My MPGs are gonna suck with the 3:91s. I can see it now.

Nah just keep your foot out of it and they should improve as 6th won't lug as much

[cammed goat]

Nah just keep your foot out of it and they should improve as 6th won't lug as much

OK. I have a feeling the shop is gonna have to look for 3:91s anyway as their suppliers can't find 3:73s. I wonder how much torque I'm gonna gain from 328? :

[wheeliE-maxx]

I may have to get them if the 3:73s cannot be located. My MPGs are gonna suck with the 3:91s. I can see it now.

.18 difference in rear gear behind a .5:1 6th gear ain't shit bro. Negligible

[pajeff02]

.18 difference in rear gear behind a .5:1 6th gear ain't shit bro. Negligible

Agree. Man up and get some 5.13's and slicks. I want to see the Goat hanging the wheels!

[SHines-IT]

Ummmm, I lol for some reason...

http://ocala.craigslist.org/cto/1633520804.html