Sound clip of 402

**Mr. Luos** · 03-23-2006, 07:14 PM

http://home.comcast.net/~mrluos/fourthclip.wmv

Not a good video...and it only gets taken to about 4,000 RPM's. But you get the idea. Idle is also set way to high right now. 1150 RPM's. Will be dropping it once the motor loosens up some more and gets dyno tuned.

TSP 402, TSP 'Giant' cam, Stage III LS6 heads, LS6 oil pump, Comp adj. timing chain, FAST LSx 90/90, etc....
Waiting to install....
TT2's, adj. panhard bar, prokit springs, rear control arms, control arm relocation brackets.

Pics to come in a couple weeks!!!!

**Mr. Luos** · 03-26-2006, 08:32 PM

Got the idle down.

Down to 975 RPM's now.
Still probably not right, but it works for break in.
http://home.comcast.net/~mrluos/idle.wmv

Baracus · 03-26-2006, 08:57 PM

Sounds sweet

**wesTXwitesnake05** · 03-27-2006, 11:41 AM

sounds bad ass!! what kind of exhaust do u have on it?

Baracus · 03-27-2006, 01:13 PM

I was wondering the same thing.

**BIG D's SS** · 03-27-2006, 01:19 PM

It sounds good. 900-1000 is just about what everybody sets them at to idle.

**Mr. Luos** · 03-27-2006, 03:57 PM

Exhaust is Kooks 1 7/8" longtubes, custom true duals with 4" X-pipe, and small billet mufflers.

Thinking about putting some different mufflers on it. This car is LOUD right now.

**cylpimp** · 03-28-2006, 07:28 PM

I seen your videos on bstuff or z24.com Im not sure which. Who did your motor work and what kinda HP are you putting down. I have a 408 stroker with no mufflers and it sounds similar to that but have been curious.

eddie

**Mr. Luos** · 03-28-2006, 07:33 PM

The work was all done by me with the help of a couple friends.
Motor swap in a one car garage is rough.

Not sure of the power yet. Feels real strong though. Dyno tune should be in about 2-3 weeks.

**cylpimp** · 03-28-2006, 09:05 PM

Let me know, Im curious to see what it puts down. Sounds good. I had my motor built and it put down 505rwhp before the 150shot. Keep me posted.

eddie