LS1/LS6 Motor for sale

[TransAmManLS6]

I am selling an LS1/LS6 motor that was being made for my project Trans Am. I am selling it because of other expenses that I need to take car of. You can find my motor on ebay. The place I bought the motor from sais it came out of a Corvette Z06 with 8,000 miles on it. The motor was never installed or ran. The fallowing are all of the performance mods installed on this engine.


Performance parts:
Ported and polished heads
TSP XS Series Camshaft: Magic Stick V.3 237/242 .603/.609"
Comp PRC Duel Valve Spring Kit, and Hardened Chromoly Pushrods
Titanium retainers
Ported and polished LS6 oil pump
Duel roller timing chain
Harland Sharp 1.7 rocker arms
Ported throttle body
MSD 8.5 mm spark plug wires
NGK TR6 spark plugs
Powder coated timing chain and valve covers
Holley long tube headers
Ram Powergrip clutch Stage 4
Fidanza Lightwieght flywheel
25% underdrive crank pulley

All of these parts have never been used, just installed. Also, while apart, the motor was cleaned.

All of these parts are already installed by trained professionals. The only work needed left on the motor are two retainers that need to be bought to complete the set. I am adding in the tool needed to compress the retainers that is special made for this motor. The value of this tool was $130 from crane cams. This engine comes with the harness, but no computer. I have all of the bolts and brackets that need to be installed on this motor. Everything you see in the picture is what you get including the rest of the brackets and wires that are not installed. This motor should produce 500+ horsepower. I have put way too much time and money into this motor to see it up for sale, but my loss is your gain.

I am asking $5,500 for this motor. I am up for offers if anyone has any. I need to the money fast and I am selling it at this price in order to get it. Please email me at TransAmManLS6@hotmail.com

I also have a BMR k-member that the motor is sitting on right now that can be added for $400.

[adude]

Where are you located in Florida? I am in Holiday just north of Clearwater. What year Corvette is the motor out of, and what is the size of the TB and MAF? What is the number on the block behind the drivers side head? Can you send pics of the motor showing the MAF, TB, and K member to dhdfh@aol.com ? Thanks,>>Dan

[TransAmManLS6]

The motor is out of a 2001 Z06. I will post pics. I am located in Parkland, in between Boca Raton and Coral Springs.

[TransAmManLS6]

http://img68.imageshack.us/img68/2029/img01294et.jpg
http://img68.imageshack.us/img68/9286/engine25fp.jpg
http://img68.imageshack.us/img68/9042/engine30sx.jpg
http://img68.imageshack.us/img68/1985/engine43oh.jpg