Results 21 to 40 of 43
Thread: Pics I took today.........
-
11-01-2009, 11:53 PM #21
those rims are niceeee! i want some
-
11-02-2009, 08:02 AM #22
- Join Date
- Dec 2006
- Location
- Jenks/Tulsa
- Posts
- 4,798
Light Pewter Metallic- y2k 8-cylinder catfish
Those are some great pics you took there P!
-
11-02-2009, 08:05 AM #23
-
11-02-2009, 08:32 AM #24
Suggestion: If you are particularly irritated by another member's posting habits and are constantly fighting the urge to flame them, you can click on that person's profile, and select "Add to ignore list." This will make that person's posts invisible to you.
-
11-02-2009, 08:38 AM #25
Yeah. I see mis-alignment on our cars a lot also. Mine has it a little, but it is where I took off the front facia to put on my 35th anv. grille.
I am not too worried about it considering when mine is parked it's in the garage
-
11-02-2009, 08:43 AM #26
-
11-02-2009, 09:09 AM #27
rehung both my doors, made shims out of stainless in a few different guages (I never stack), and lots, and lots, and lots of time and pacience(sp). The only place that I could do nothing with was the spoiler area. It's not quite as wide across the area over the berger panel as I'd like, however the gaps on both sides are dead even.. I also never pry on a panel to get to something, such as a turn signal or marker..
Last edited by Smittro; 11-02-2009 at 09:16 AM.
-
11-02-2009, 09:18 AM #28
I've also been known to come unglued on any inspection shop that attemps to improperly lift my car, believe me I watch them too. ...And YES I am anal about it..
-
11-02-2009, 09:22 AM #29
-
11-02-2009, 09:27 AM #30
- Join Date
- Dec 2006
- Location
- Jenks/Tulsa
- Posts
- 4,798
Light Pewter Metallic- y2k 8-cylinder catfish
That sounds like a ton of work just to adjust the panels at best a fraction of an inch. The only real nasty blemish on mine is the on the drivers side where the front fender piece meets the front of the door. There's a gap where the car was improperly put on a lift (prior to my buying the car). I had a body shop adjust it as best they could and the gap is a bit less noticeable, but one of the bolts underneath was stripped out and if I want to repair it completely, I'll need to have a completely new piece installed.
-
11-02-2009, 09:35 AM #31
LOl as I said I'm anal about it (hate crooked shtuff) but honestly I love doing the work really, not really a ton of work just teedious(sp) and time consuming.
You also have to understand what it looked like when I got it. Not a single panel was properly aligned. The previous owner had to slam the sh^t out of the hatch to close it. Only thing I want to do now is get a heavier spring for the hatch release, hate having to push the bottom ten times only to find it's still hooked ugh. With my keyless I can open my hatch easier buy pushing the hatch botton, and lifting it @ the same time..
Last edited by Smittro; 11-02-2009 at 09:45 AM.
-
11-02-2009, 09:38 AM #32
Daaauyyyyyyyyymmmmm preston!!
your SS is SSmokin hott!!
I dont think ive ever seen such a flawless camaro ever
Absolutely beautiful!
-
11-02-2009, 10:30 AM #33
- Join Date
- Apr 2007
- Location
- Warren, Oh.
- Age
- 40
- Posts
- 327
02 Camaro SS S.O.M.- 07 Trailblazer SS AWD
as usual im not dissapointed, lookin good
02 som SS #4818 m6 all SLP options, cme, lt's, ory, e-cutout, lowered(slammed), Pro 5.0, 4:10s, boltons, 19" CCW 505A'S, 365rwhp 379ftlbs
07 silverstone TBSS matching SS hood, cai, exhaust, HP tuners, DJM/Beltech, DAILY DRIVER
-
11-02-2009, 11:16 AM #34
-
11-02-2009, 11:18 AM #35
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 37
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
ehhh less then average ................
-
11-02-2009, 03:30 PM #36
- Join Date
- Nov 2006
- Location
- Broken Arrow, OK
- Age
- 50
- Posts
- 23,345
Pewter metallic- 2000 Camaro SS
Smittro, I know you aren't trying to be a dick, don't worry. If the passenger door is off a smidgen, I haven't noticed it in person. If it is off to a degree, its not enough that its annoying me. No car is perfect, even mine has a flaw here and there.
-
11-02-2009, 04:46 PM #37
-
11-02-2009, 05:03 PM #38
Hey Pres, you can call me Steve. Your car is flawless in my eyes, It could simply be the angle. I only seem to see it from the rear angle, (tail light looking towards the front). Could easily be the lighting, reflections, or simply my eyes don't work as they used to. I say stuff mostly to hurass you bud. Nothing personal @ all. "No car is perfect", is BS bro, cuz your's IS. If there are flaws in the finish I sure can't see them, and I've looked too lol. I hurass Jon about his having no mileage on it too.
-
11-02-2009, 05:04 PM #39
-
11-02-2009, 05:08 PM #40
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New pics from today
By 1fastz28 in forum Member's RidesReplies: 2Last Post: 03-11-2010, 02:44 PM -
Took a few pics today !
By 98T/Aformula in forum Rocky Mountain MembersReplies: 17Last Post: 05-03-2007, 04:20 PM -
took some pics today
By Sas in forum Rocky Mountain MembersReplies: 10Last Post: 05-02-2007, 10:59 AM -
Took some pics today
By HASTINGSRJ in forum Western MembersReplies: 55Last Post: 01-06-2006, 03:22 PM -
few new pics today =)
By EVL LS1 in forum Appearance SectionReplies: 9Last Post: 10-06-2005, 07:48 PM
Bookmarks