Results 1 to 4 of 4
Thread: Cam Spec Question
-
09-22-2009, 12:15 PM #1
- Join Date
- Mar 2007
- Location
- NC
- Posts
- 421
NBM- 1998Z28
Cam Spec Question
I bought a new GM crate motor a few years back. It was listed as a 2001 Corvette motor and came with the vette and the f body oil pan. I believe it was a 350hp/385 torque motor. When I bought it I took out the stock cam and put in a TSP grind. Does anybody have the specs on the cam that i took out? Somebody told me it would be a good upgrade for a 5.3 motor, but I hate to sell somebody something without knowing the specs. I checked the cam thread posted for the stock motors but the GM crate motor specs aren't listed.
TSP 347 SB, TSP Stage 2.5 PRC LS6, TSP MS4, Performabuilt Stage 2 4L60E, Yank PT4000, 4.11s, Fast 90/90, FTRA Cold air intake+all the free mods, Dynatech Supermaxx Exaust System, DMH Cutouts, Hooker Catback/FTRA Tips. Tuned by RPM/Garner NC. 11.28@119
-
09-22-2009, 03:25 PM #2
http://www.ls1.com/forums/showthread...1998+stock+cam
If you need anymore information on stock cams sizes... the search will for sure bring up some results.
-
09-23-2009, 06:01 AM #3
- Join Date
- Mar 2007
- Location
- NC
- Posts
- 421
NBM- 1998Z28
-
09-23-2009, 06:08 AM #4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question about Spec Clutches
By Jray67 in forum Manual TransmissionReplies: 8Last Post: 06-17-2007, 10:41 AM -
Spec III+
By zlizard in forum Manual TransmissionReplies: 5Last Post: 06-14-2007, 04:24 PM -
Question on Spec clutches
By Jray67 in forum General HelpReplies: 5Last Post: 05-12-2007, 07:59 PM -
Spec Stage 1 Clutch question PLEASE HELP!!!
By cableguy0956 in forum Manual TransmissionReplies: 7Last Post: 07-05-2006, 06:29 PM -
spec stage 5 question
By sscrazy in forum Manual TransmissionReplies: 3Last Post: 08-30-2005, 03:55 AM
Bookmarks