Results 1 to 4 of 4
Thread: Heads and Intake swap
-
09-16-2009, 02:27 PM #1
- Join Date
- Aug 2009
- Location
- Houston
- Posts
- 35
Red- 98 C5
Heads and Intake swap
Will the heads and intake off of a 2005 ls2 fit my 98 ls1. Are they a direct bolt up? Do I need to change push rods? Will my old rocker arms work?
-
09-16-2009, 03:37 PM #2
- Join Date
- May 2006
- Location
- Somewhere in hurricane alley!
- Posts
- 208
Millennium Yellow- '02 Corvette
Yes the LS2 heads will fit on the LS1. LS2 heads are the exact same casting (243) that was used on LS6 engines with the same bore size as the LS1. The only difference between a LS6 and LS2 head is the valves and springs (same size, just the LS6 had the lighter sodium filled exhaust ones for higher RPM's). The LS2 intake will fit also but personally Id put a FAST 90 on it instead.
-
09-17-2009, 03:21 AM #3
- Join Date
- Aug 2009
- Location
- Houston
- Posts
- 35
Red- 98 C5
Would there be any hp gains from the swap?
-
09-17-2009, 04:21 AM #4
- Join Date
- May 2006
- Location
- Somewhere in hurricane alley!
- Posts
- 208
Millennium Yellow- '02 Corvette
Yes but not as much if you went with some aftermarket heads. Just guessing Id say maybe 35hp with a good tune. I havent done that swap so Im not sure. Maybe someone else will chime in who has made that head swap.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: HOW TO: Swap stock intake with LS6 intake
By thechad125 in forum General HelpReplies: 18Last Post: 02-26-2013, 03:17 AM -
Heads Cam Intake Swap
By Camaro69Mac in forum Internal EngineReplies: 4Last Post: 12-17-2010, 11:47 AM -
Heads Cam Swap...
By Camaro69Mac in forum Internal EngineReplies: 1Last Post: 12-13-2010, 05:50 PM -
Help: Heads cam swap??
By rmftbllfan in forum External EngineReplies: 1Last Post: 04-21-2010, 02:19 PM -
05 GTO- L92 heads and Cam swap. Pix
By juiced99ws6 in forum Internal EngineReplies: 26Last Post: 08-16-2007, 08:23 AM
Bookmarks