Been testing Oil

[mephy]

Short answer is absolutely. Lucas is solvents and really doesn't have much in the way of lubrication qualities as the TCW3 2 stroke cleans and lubricates. Also the TCW3 is excellent at cleaning the ring packs.

I wanted have just a confirmation.

Lucas was the first additive that I put constantly in the tank, than I passed to TC-W3.

With TC-W3 I immediately noticed the difference the car wasn't loosing power and was more quite.

This for sure is due for what you said.

Now I want do another step forward I want use a better TC-W3 with more cleaning power It cost as Lucas but I think Is worth.

The oil is Hp Injector of AMSOIL.

[Sarge]

ims ure i could find this by reading thorugh some of the posts, but are you using this on every fillup forever? Or every other tank? Ive been doing this for about 5 tanks and my gas mileage and idle has been much better ! (id say about 50 more miles out of a tank)

Every fill up. Just do it when you get home.

[Sarge]

I wanted have just a confirmation.

Lucas was the first additive that I put constantly in the tank, than I passed to TC-W3.

With TC-W3 I immediately noticed the difference the car wasn't loosing power and was more quite.

This for sure is due for what you said.

Now I want do another step forward I want use a better TC-W3 with more cleaning power It cost as Lucas but I think Is worth.

The oil is Hp Injector of AMSOIL.

We have people using it. Good stuff but I cannot say it is better or worse at a 500:1 ratio frankly. If you want to use it go right ahead...wont hurt anything at all.

[LS1Jason]

i started this tonight. filled up and put 4oz's in. so, we'll see here in a couple months with as little as i drive the camaro.

[NightHawk]

Hi! Here in europe it is not easy to find TCW3 2T oil, so I am using only JASO FD or ISO-L-EGD certified 2T synthetic oils with excellent results, usually Castrol.
As far as I know these two specs are pretty much the same and require passing some high detergency, very low smoke/ash tests.

http://www.7thgear.net/7thGear/Porta...il%20specs.pdf

[Sarge]

Hey NightHawk welcome to the forum.
Yeah I looked at that spec....looks like it will work. Did it smooth out you motor?

[LS1Jason]

hell, I've only put about 100 miles on the first tank using it, and i can already tell mines smoother. amazing stuff to me.

[NightHawk]

Hey NightHawk welcome to the forum.
Yeah I looked at that spec....looks like it will work. Did it smooth out you motor?

Sure! I feel it punchier too!

I have been using it with a 400:1 mix in every fill in the last 20000 km (about 16500 miles) with only good results.

Regards!

[VTXrider]

The Great Ethanol Scam

"Over at BusinessWeek, Ed Wallace is creating quite a stir, reporting that not only is ethanol proving to be a dud as a fuel substitute, but there is increasing evidence that it is destroying engines in large numbers. Before lobbyists convince the government to increase the allowable amount of ethanol in fuel to 15%, Wallace suggests it's time to look at ethanol's effect on smog, fuel efficiency, global warming emissions, and food prices. Wallace concedes there will be some winners if the government moves the ethanol mandate to 15% — auto mechanics, for whom he says it will be the dawn of a new golden age."

http://www.businessweek.com/lifestyl...514_058678.htm

Sarge I know you talk about how TC-W3 helps protect the fuel system from ethanol but I could not put my finger on why. I would not think that it coats things to keep the ethanol off, so what exactly is it doing to protect the fuel system from ethanols damaging effects?

[suede]

ethanol is a very dry fuel, IE like Alcohol, and the oil helps keep things lubricated and moist, like the fuel pump and such

[Sarge]

Long story short.
TC-W3 is a corrosive inhibitor. Ethanol is not only a stupendous failure (only the people in the industry are profiting off the back of the taxpayers who gain nothing from Ethanol) it is a extremely corrosive substance. TC-W3 provides a protective barrier on your silicon/plastics/aluminum/steel components it does reduce the corrosive characteristics of ethanol.
In all fairness to the ethanol rip off industry I should say today's gasoline is corrosive also.
TC-W3 is a inexpensive good thing for anybody to do in any internal combustion motor.

[blackcar]

.....the oil coats and protects your upper cylinder and rings....]

Sarge I just ran across this thread for the first time. Thanks for the info.

I have a couple of ?? tho. I've always been scared of anything that says it coats parts of my engine. Maybe Im just dumb but it seems if it coats it will build up and flake off. Isn't that the main prob with slick 50?

Second would it be worth while to find TC W3 for all my 2 strokes (i.e. chainsaw, leafblower)?

Third, I have a '89 GMC pu. I gave it a tune up not to long ago but it stills idles a little ruff. I'm going to give this a try in it. I'm looking for a way "measure" how ruff the idle is. So I can give b4 and after. I was thinking something like a dail indacator mounted on the fire wall with the indacator on the valve cover, but I dont have one.

Thanks in advance.

[Sarge]

Sarge I just ran across this thread for the first time. Thanks for the info.

I have a couple of ?? tho. I've always been scared of anything that says it coats parts of my engine. Maybe Im just dumb but it seems if it coats it will build up and flake off. Isn't that the main prob with slick 50?

Second would it be worth while to find TC W3 for all my 2 strokes (i.e. chainsaw, leafblower)?

Third, I have a '89 GMC pu. I gave it a tune up not to long ago but it stills idles a little ruff. I'm going to give this a try in it. I'm looking for a way "measure" how ruff the idle is. So I can give b4 and after. I was thinking something like a dail indacator mounted on the fire wall with the indacator on the valve cover, but I dont have one.

Thanks in advance.

No question is dumb.
When I say coats I mean it provides lubrication to those parts. It doesn't "build up" at all. Slick 50 (oil additive) was loaded with teflon. Bad thing.
TC-W3 is a high end 2stroke oil. Use it in anything. It's add packs leave nothing behind. It is a very clean burning oil.
Place a small cup half full of water and mark the highest points it sloshes on the inside of the cup for comparison. You will have to sorta hold it steady but the sloshing water will not lie about smoothness...we use to do this on helicopters.

[VTXrider]

Sarge does TC-W3 had a shelf life once it is opened, does it absorb water or anything? I have a gallon bottle open for almost a year now since I don't put too many mile on, should this bother me?

[Moosestang]

So can I put this in an air cooled v-twin? How about a supercharged mustang?

[suede]

So can I put this in an air cooled v-twin? How about a supercharged mustang?

Long story short.
TC-W3 is a corrosive inhibitor. Ethanol is not only a stupendous failure (only the people in the industry are profiting off the back of the taxpayers who gain nothing from Ethanol) it is a extremely corrosive substance. TC-W3 provides a protective barrier on your silicon/plastics/aluminum/steel components it does reduce the corrosive characteristics of ethanol.
In all fairness to the ethanol rip off industry I should say today's gasoline is corrosive also.
TC-W3 is a inexpensive good thing for anybody to do in any internal combustion motor.

[blackcar]

When I say coats I mean it provides lubrication to those parts. It doesn't "build up" at all. Slick 50 (oil additive) was loaded with teflon. Bad thing.
Place a small cup half full of water and mark the highest points it sloshes on the inside of the cup for comparison. You will have to sorta hold it steady but the sloshing water will not lie about smoothness...we use to do this on helicopters.

I assumed that is what you meant, but Ive learnt to get things clarifed.

That is a good idea for measuring smoothness.

Thanks

[BrettJ]

Sarge have you research this with Air Cooled vehicles? Like the older VW's.
Or is it just for Liquid Cooled Motors?

[Sarge]

We have 2 air cooled motors. One older Porsche and one VW. We are treating the fuel.....it applies to any internal combustion engine down to 4 stroke lawn mower/go carts.

[Sarge]

Sarge does TC-W3 had a shelf life once it is opened, does it absorb water or anything? I have a gallon bottle open for almost a year now since I don't put too many mile on, should this bother me?

Well as with any petro based product.
Keep in a tightly sealed container....and out of direct sunlight and freezing temps and shelf life is approximately 3-4 years. I always shake any oil to remix the add packs which have a tendency to settle to the bottom prior to pouring it in.